Re: EX3300 - out-of-band interface - not working

Hi,

- I am connected via CLI via IP 172.16.20.254

- I attached whole output of display set (this is really useful)

set interfaces me0 unit 0 family inet
set interfaces vlan unit 0 family inet address 172.16.20.254/24
set interfaces vlan unit 1 family inet address 192.168.200.254/24
set interfaces vme unit 0 family inet address 192.168.221.16/24

should I change then this to next hop 192.168.221.1 ? or completely delete it as it should serve only as L2 switch with MGMT interface 192.168.221.x 

set routing-options static route 0.0.0.0/0 next-hop 192.168.200.1

I also didn`t get this command -->

set system backup-router 192.168.221.1

- I`ve noticed there is mentioned unit 1, but as it is only one physical machine I suppose there is only unit 0

- commit confirmed x <-- this is exact syntax of the command? 

Thanks

Stefan