Re: Firewall filter to restrict traffic for one interface

---

jonashauge wrote:

I think you miss "then accept" in the term:

 

jh@switch# show firewall family ethernet-switching
filter test {
    term test {
        from {
            source-address {
                192.168.1.66/32;
            }
        }
        then accept;
    }
}

Please update your configuration and try again

---

I already said in the original post that I had tried this.

"I tried specifying "set then accept" to the NAS-Inbound-Allow term, and then I applied the filter to ge-0/0/5 again, but then I still can't ping the NAS. When the filter is applied, the NAS becomes unreachable."