Re: VLAN membership MAC limit
Are you sure this can only be applied to Acess interfaces? I do not see in the documentation anything that states this limitation, such that MAC-Limits could not be set on L2 Trunk or Tagged...
View ArticleRe: VLAN membership MAC limit
I'm sure it can be enabled on the access interfaces only. Tested on EX4200.Plase see the second paragraph...
View ArticleRe: False fan LED status on QFX5200?
Hi, reseating the individual fans doesn't change the behavior. I also tried swapping a fan with a green LED with one with a amber LED. This resulted in even weirder behavior since it changed the status...
View ArticleRe: False fan LED status on QFX5200?
Hello, Since when did you start noticing this issue?Did this switch show the said behavior from the beginning or everything was fine earlier?I am just trying to understand the trigger of this. Regards,...
View ArticleRe: VLAN membership MAC limit
Hello, You can check this link: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/mac-limit-port-security.html [edit ethernet-switching options...
View ArticleRe: VLAN membership MAC limit
I understand your view, and yes if only applicable to an access interface, and not tagged/trunk, then addition of VLAN makes little to no sense as a requirement - could somehow be related to the...
View ArticleRe: VLAN membership MAC limit
HI First we can not apply this mac limit on trunk ports {master:0}[edit]root# show | display set | match ae0 | match trunk set interfaces ae0 unit 0 family ethernet-switching port-mode...
View ArticleRe: False fan LED status on QFX5200?
HI Can you please paste the output of show chassis alarmsshow system alarmsshow chassis lcdshow chassis ledshow chassis environment ThanksPartha
View ArticleRe: DHCP Snooping Binding on EX8208
HI By default all access ports are untrusted. You can make the port going towards the server trusted.Can you add that configuration and check. Because the snooping binding table takes the lease...
View ArticleRe: DHCP Snooping Binding on EX8208
Hi Partha, I attached our topology in my first post here, if you take a look there, you can see that our EX8208's port that is connected to our Layer3 network is a trunk port(also this is the interface...
View ArticleRe: False fan LED status on QFX5200?
> show chassis alarms No alarms currently active> show system alarms 2 alarms currently active Alarm time Class Description 2017-03-22 13:13:48 CET Minor JBS For Node locked licenses needed for...
View ArticleRe: EX-4200 VC stack with DWDM SFP+ fiber
hi guys,I have problem with my virtual chassis on mx series, vc port not synch to peering device through dwdm. Any advise ?RBS,
View ArticleRe: VLAN membership MAC limit
Thank you all for sharing your insight First of all mac-limit can be applied to access ports only and is usually done with:set ethernet-switching-options secure-access-port interface ge-0/0/1 mac-limit...
View ArticleRe: VLAN membership MAC limit
Thanks for the input. Now makes a lot of sense why VLAN portion is included.
View ArticleRe: how many vrrp groups on EX and QFX ?
I posted this question a long time ago...To conclude this post, that's what I foudn after some reading and some Juniper support questions. RFC 3768 state that :3. VRRP Overview ../.. A virtual router...
View ArticleRe: Issue on QFX VCF with D40
Hi Partha,thanks for your info, probably the issue is some TAG packet coming with wrong TAG.Now I found other problem in a leaf 3 that don't send traffic in ae with bundle on other port spine 1, this...
View ArticleVC-Ports on QFX5110
Hi, This week a bunch of new QFX5110 arrived. I tried building a VC with two of the QFX5110-48S(R 15.1X53-D210) in our Lab. I sucessfully managed to form a VC with 10GE ports as VC-port. But i failed...
View ArticleRe: VC-Ports on QFX5110
Hi Folks,Please share the below part, show virtual-chassis vc-portlab> show virtual-chassis vc-portfpc0:------------------------------------------------------------------------ --Interface Type...
View ArticleEX4200 boot problem tsec0: no hardware MAC address
Hello. I have a problem with one EX4200-48T. It can't boot JunOS. Boot log U-Boot 1.1.6 (Jun 5 2012 - 02:26:04) Board: EX4200-48T 5.23 EPLD: Version 10.0 (0x82) DRAM: Initializing (1024 MB) FLASH: 8 MB...
View ArticleRe: EX4200 boot problem tsec0: no hardware MAC address
Did you try to format the device from USB? Do you by any chance have the output of "show chassis firmware"? Very likely, if the format will not help, then you might need to replace the device.=====If...
View Article