Re: 802.1-AE not working with EX4300
Yes, the clients connecting are using Linux with iproute2, that's the reason we chose this approach.
View ArticleRe: 802.1-AE not working with EX4300
Again, I would ask same question - does MACSEC switch to client work without 802.1x involved? You proven 802.1x works without MACSEC, yes? Only other option I see for you is to open a TAC case. I...
View ArticleRe: False fan LED status on QFX5200?
It's now almost certain that the firmware is the culprit here. Went back to 15.1X53-D30.5 and the problem went away - all LEDs green as expected. After I went back up to 15.1X53-D210.7 the old problem...
View ArticleRe: 802.1-AE not working with EX4300
I never tried macsec without 802.1x, because in the juniper documentation it clearly states that 802.1x is required in order for macsec to work, because a part of the 802.1x handshake (EAP) is being...
View ArticleRe: 802.1-AE not working with EX4300
OK, and i now understand. I think only way you make any progress is via a TAC case. Good luck.
View ArticleRe: 802.1-AE not working with EX4300
Hi Alexandru 2 things I would want you to confirm 1) Does Dot1x work fine as standalone >>>> Yes as you have mentioned in the trailing mails.2) MACSEC works without Dot1x also.Please use...
View ArticleRe: False fan LED status on QFX5200?
HI Daniel There surely is a problem which we need to address. Please open a technical case with TAC we will help you. One qucik thing do you see these errors across different 5200's?ThanksPartha
View ArticleRe: EX2200 lost management interface after ethernet loop
HI Could you please check this 1) Ping to the mgmt IP from the PC and run "monitor traffic interface me0 no-resolve" and see if ICMP packets are coming in.2) Also get the output of show route.3) Can...
View ArticleRe: EX4200 boot problem tsec0: no hardware MAC address
HI This looks like real hardware problem. We should be considering replacing the swithc if not recovered through Format. ThanksPartha
View ArticleRe: False fan LED status on QFX5200?
We only have the one 5200, so I can't check other units.
View ArticleQOS ingress dscp marking on EX
Iam using Multifield classifier using firewall filter to classify the incoming packets based on the source address and trying to mark the dscp for that packet. Iam using set dscp xx and applying...
View ArticleRe: QOS ingress dscp marking on EX
according tohttp://www.juniper.net/us/en/local/pdf/implementation-guides/8010073-en.pdf you can change the dscp only in the following ways: Remarking:Remarking involves changing the QoS priority...
View ArticleRe: QOS ingress dscp marking on EX
Thanks Alexander for the quick response. Do you know why using dscp in the action field of filter doesnt work. When i commit, i dont see any warning/error message.
View ArticleRe: QOS ingress dscp marking on EX
HI Could you try the below set class-of-service rewrite-rules dscp VOICE-DSCP-REWRITE import defaultset class-of-service rewrite-rules dscp VOICE-DSCP-REWRITE forwarding-class VOICE-EF-CLASS...
View ArticleRe: False fan LED status on QFX5200?
HI DanielWe will work on this through TAC case. We should be checking this in lab and see the behaviour. ThanksPartha
View ArticleRe: QFX3500 Configure Management Port but not me0
HI You could set system services sshdelete interfaces ge-0/0/47set interfaces ge-0/0/47 unit 0 family inet address 10.0.0.1/24set interfaces ge-0/0/47 description "Management port" commit confimed 3...
View ArticleEX-3300 Switch - Port Interfaces not displaying in J-WEB after upgrade to...
Hello, I upgraded my firmware to version 15.1R5.5 and J-WEB to 15.1A3 tonight and now my ports interfaces are not showing up in J-WEB on my EX-3300 switch. Is this a know bug? Please advise on how to...
View ArticleEX4200 with CAT6 cabling
Has anyone had any issues with CAT6 cabling with the EX switches? I have a client who has had an office refurbishment and installed CAT6 cabling. Since then they have had problems with ports bouncing....
View Article