EX3300 JunOS 15.1R5.5 won't boot to single user mode
After upgrading to15.1R5.5, our EX3300s no longer can boot to single user mode with "boot -s" from the boot-loader prompt. Instead, the console shows what looks like the usual process, but then the...
View ArticleRe: EX4200 with CAT6 cabling
I would look for an equipment, rack, and/or cabling grounding fault.
View ArticleRe: QOS ingress dscp marking on EX
I have the rewrite dscp working as it is marking the desired dscp values on the outgoing interface, Iam trying to change the dscp values of the packet in the incoming interface using firewall filter....
View ArticleRe: EX-3300 Switch - Port Interfaces not displaying in J-WEB after upgrade to...
Is this stand alone or VC.?
View ArticleQFARIC QFX3000-m
Hi all geeks, I have two questions1. Can we have LACP LAG'S across members of two different RSNGs? I mean one interface of a server chassis goes into RSNG-0, Node-0 and other interface goes to...
View ArticleRe: QFARIC QFX3000-m
Hello, Here is the link where you might get answer to your first question on Page 11. http://www.juniper.net/us/en/local/pdf/implementation-guides/8010082-en.pdf Regards, Rushi
View ArticleRe: EX-3300 Switch - Port Interfaces not displaying in J-WEB after upgrade to...
I have an update. I tried the CHROME browser and it is working great. The problem is with my version of Internet Explorer. I have version 11 installed. What setting(s) do I need to configure in IE to...
View ArticleEX 4200, 3200 switches participating in Provider RSTP
I have a QinQ network where it basicly forms a triangle 2 parts of the triangle are a Ceragon product, and the 3rd is a juniper EX4200. I am trying to congure RSTP on them. The problem is that the...
View ArticleCan't get an RMA for just a power supply?
I have in the past (more than a few times) gotten RMA's for failed power supplies and sent them in and gotten the replacement a few weeks later. Should be simple process. Today I go for the same and...
View ArticleRe: EX 4200, 3200 switches participating in Provider RSTP
Interesting, I do have this option on a 4300: ps@ex4300-test# set protocols rstp bpdu-destination-mac-address ? Possible completions: provider-bridge-group 802.1ad provider bridge group address...
View ArticleRe: Can't get an RMA for just a power supply?
This is a strange response. I have replaced and gotten RMA for power supply only on the ex4200 series in the past. Seems like this is a mistake by an employee thinking they are being helpful. I would...
View ArticleRe: EX3300 JunOS 15.1R5.5 won't boot to single user mode
perhaps the media check shell script would work for you. https://kb.juniper.net/InfoCenter/index?page=content&id=KB20570
View ArticleRe: Can't get an RMA for just a power supply?
Power supply s/n is AV0809390133 which they say does not show in the database (and sure when I check the warranty entitlement it doesn't show, but neither do other power supplies just spot checking)....
View ArticleRe: Can't get an RMA for just a power supply?
If you want to solve your current situation easily, just provide SN for the EX4200 and RMA a new switch, take out the power supply and use it, and return RMA unit with defective P/S. If you want to...
View ArticleRe: Can't get an RMA for just a power supply?
HI Doesnt seem like the SN is reistered, the best solution for this would be get RMA for entire chassis replace the PS and return. ThanksPartha
View ArticleRe: EX 4200, 3200 switches participating in Provider RSTP
HI This command I think is supported only on 4300/9200 not on 3200/4200. ThanksPartha
View ArticleRe: QFARIC QFX3000-m
HI For first question https://kb.juniper.net/InfoCenter/index?page=content&id=KB21756 For the second one, we suggest please open a ticket. ThanksPartha
View ArticleRe: EX4200 with CAT6 cabling
It should work. Cable Specification for 10GBASE-T Network Ports and 10GBASE-T Expansion Module Ports Ports on Switches IEEE Cable Standard Cable Standard Specification Maximum Reach Frequency (MHz)...
View Article