Re: Can't get an RMA for just a power supply?
Here are some previous power supply only replacements2016-0908-06982016-0822-04062016-0105-04022015-0904-0274 Looking at my case history I've done this a dozen times (replaced just failed power...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
Hi, To have a proper web management working you have to follow below steps :> copy both packages under /var/tmp> request system software add no-validate /var/tmp/jweb-15.1R5.5-signed.tgz...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
Hi, Here is the link to official documentation from Juniper Portal : J-Web Application Package for EX Series Good Lecture. BR/Zakour
View ArticleRe: QOS ingress dscp marking on EX
HI Velu Are you saying you are just configuring MF without any COS profile? Did you check this example...
View ArticleRe: QOS ingress dscp marking on EX
Multified classifier only classifies the traffic it does not manipulate the packet header You should check to see if it is being classified. You have not aded the following:...
View ArticleEX-4300 Q-in-Q and l2tunneling
Hi, We have been trying to get this setup working properly: Customer(cisco) <-> EX4300 <-> MX960 <-> MX80 <-> Cusomer(cisco) Between the MX routers there is a l2circuit. EX...
View ArticleClik here to view.
Setting OSPF up
Trying to setup OSPF for the three links to the MPLS cloud.Would the code below work.? protocols { ospf { area 0.0.0.0 { interface lo0.0 passive; interface ge-0/0/21.0; interface ge-0/0/22.0;...
View ArticleRe: QOS ingress dscp marking on EX
I have added the forwarding class and loss priority on the MF and could see the packets being classified. so the purpose of setting dscp action modifier on the firewall filter is only used for the...
View ArticleRe: Can't get an RMA for just a power supply?
The fix - send them a picture of the power supply with p/n and s/n showing (thanks to my support guy for thinking of that). Support updates the database so that shows as a serial number, and then...
View ArticleRe: Setting OSPF up
Hello,Bit by bit:starlog wrote: Trying to setup OSPF for the three links to the MPLS cloud.Would the code below work.? protocols { ospf { area 0.0.0.0 { interface lo0.0 passive; interface...
View ArticleRe: EX-4300 Q-in-Q and l2tunneling
HI I can give you an example , hope this helps.QinQ ELS Configs+------------------+ +------------------+ +--------------------+ +--------------------+| EX2200 +---------+ QFX-5100 +---------+ EX3300...
View ArticleRe: Setting OSPF up
Alex, You did not show us where & how this policy is applied so no opinion.What are you meaning "applied" .? thanks
View ArticleRe: Setting OSPF up
Hello, there,You showed us only the "ospf" policy definition under [edit policy-options].For this policy definition to take effect, it has to be referenced under [edit protocols ospf export]or[edit...
View ArticleRe: Setting OSPF up
Alex, OK, lets see if I can share it. protocols { ospf { traceoptions { file OSPF_Troubleshooting; inactive: flag error; inactive: flag general; inactive: flag hello; inactive: flag event; flag all; }...
View ArticleClik here to view.
VLAN Configuration Help
I have an EX2200 switch that I have configured 4 vlans on - 203, 204, 209 and 215. I used the JWeb to configure it since I am not very familiar with the Junos CLI language. I assigned vlan 209 to...
View ArticleRe: VLAN Configuration Help
You might want to post your whole config, after removing any sensitive items such as passwords. Using the CLI Viewer in the J-Web Interface to View Configuration Text
View ArticleRe: VLAN Configuration Help
## Last changed: 2015-02-18 07:30:27 ESTversion 12.3R9.4;system { host-name BLAWS1005A; time-zone EST5EDT; root-authentication { encrypted-password "$1$XNW1Nffa$4Nd34O1k83PLd7POKjF6A1"; } services {...
View Article