Re: How do I block port 25 on EX4600
starlog, Hello! One configuration snippet in particular caught my attention. In your original request you asked to block traffic "from port 25 smtp". In the below configuration, you have a match...
View ArticleRe: Web Management not functiong ES-4200 11.4R7.5
https://kb.juniper.net/InfoCenter/index?page=content&id=KB21731
View ArticleRe: Juniper compatibility with Cisco vCP
Thanks for the response.It looks like MC-LAG and vCP are both implementations of the IEEE 802.1AX-2008 standard.I can not fine anywhere that says they are compatible. In fact I find that each is a...
View ArticleRe: Web Management not functiong ES-4200 11.4R7.5
and if the solution provided in the KB didn't solve your problem , then as mentioned in the KB you'll need to open JTAC case . But you cannot do that when you're running 11.4 version as this version is...
View ArticleRe: Web Management not functiong ES-4200 11.4R7.5
Thank you so much that worked liked a charm! You all are awesome!
View ArticleJuniper EX LACP over WiFi for Point to Point WiFi
Hi Gurus, Need to ask your opinion for some ex LACP. We have a customer using 2 pair of Ubiquiti p2p WiFi, and they want to LACP to ex switch. I done configuration the LACP at both ex d. However when I...
View ArticleRe: Chassis Alarm Potential slow peers are: spmd When Fusion Configured
As an update for everyone, a PR has been elevated. I've been also informed that this warning alarm is pretty much benign and it occurs only upon the restart of the SPMD daemon. Technical explanation...
View ArticleRe: Juniper EX LACP over WiFi for Point to Point WiFi
Below is the kb step by step for troubleshooting a lag up / down issue. But first, I would validate that your basic cabling - poe injector - and ubiquity bring a physical link up. Try moving them to a...
View ArticleRe: Chassis Alarm Potential slow peers are: spmd When Fusion Configured
Thanks for the update and keep us posted. Also if you could add the PR number for reference that would be great.
View ArticleRe: Juniper EX LACP over WiFi for Point to Point WiFi
Yup. We tested that. And connection of the poe injector to a normal access or trunk port, all works fine. Interface link status are able to fire up and traffic running smoothly. When we unplug and...
View ArticleClik here to view.
Re: Juniper EX LACP over WiFi for Point to Point WiFi
Hi,I'm just interested if there is an option to enable LACP feature in the AP as well .Because I remember that in arubanetworks you need to enable the LACP profile .Again , not sure , just interested
View ArticleRe: EX4200 log on OS 15.1R5.5
We're having the same issue here May 4 09:45:40 2017 172.31.110.173 /kernel: rts_commit_proposalmput op: 2, peer_type:25, peer_index:1, vskid:0, seqno:86438, flag:10,May 4 09:45:40 2017 172.31.110.173...
View ArticleRe: Troubleshooting error message
HIBy any chance is this LX10?This SFP LX10 is not qualified on EX4300.ExampleIC 2 REV 04 611-044925 MY3713480373 4x 1G/10G SFP/SFP+ Xcvr 0 REV 01 740-011614 AC0804S00QL...
View ArticleLogging to master..... EX4200
Good day. My ex4200 was in virtual chassis.Then disconnected it from chassis.Now I can't log into console to this switch. It seems like some files missing or some unmounted I don't know # dfFilesystem...
View ArticleIPv6 on vme
Hi,I have 2x EX4550 in a virtual chassis and a bunch of standalone EX4200 switches. I am trying to setup IPv6 on the vme interface of my VC. The configuration is very similar to what you would do for...
View ArticleRe: IPv6 on vme
IPv6 on vme interface is not supported.=====If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
View ArticleQ-in-Q QFX 5100
I have been struggling with Q-inQ on my QFX 5100 switches all day and despite reading all the forum posts and KB articles I could find, was not able to find a complete configuration that would work for...
View ArticleRe: Q-in-Q QFX 5100
And to take this one step further, how to do L2PT in addition to QinQ: http://nextheader.net/2016/09/09/qinq-and-l2pt-on-junos-els/=====If this worked for you please flag my post as an "Accepted...
View ArticleRe: Q-in-Q QFX 5100
Hi Parau, I haven't looked at your Q-in-Q configuration but I can tell you that L2PT isn't supported on the QFX5100 series - not that the hardware isn't capable but PM has apparantly decided to keep...
View ArticleRe: IPv6 on vme
Hi, What is the junos version running on the EX4550?As per pathfinder, IPv6 management and services are supported on EX4550 as from 12.2R1https://pathfinder.juniper.net/home/#EX4550/Features Cheers,Ashvin
View Article