Re: Can ex-sfp-10ge-sr be used on MX240?
The MX series will accept any stanard optics that the particular card you have installed support. I have used a variety of third party multi mode SFP+ successfully.
View ArticleRe: SNMP traps not out from Juniper EX4600 Switch
You are sending the traps from a routing instance other than the default one. There are limitations on snmp inside routing instances. I'm not sure you can use the desired interface as the trap...
View ArticleRe: Integrate DPI with Juniper MX
I would move the peering routers to a virtual router routing instance. then you can use one subinterface on the DPI device to receive traffic from the upstream with the second to send the inspected...
View ArticleRe: EX 3400 Configuring Vlans question
Multiple ways to wipe config. 1- >request system zeroize2 #load override factory-default and tweak from scratch3 if you are logged in to the console port, delete all interfaces, delete all vlans,...
View ArticleRe: EX 3400 Configuring Vlans question
BryanP wrote:Smiker, After doing a rollback, I tried that setup, along with adding physical ports to the vlan. Any time I set the unit to anything other then 0 it fails with a smiliar error that I...
View ArticleNeed to know how to add description to the Static routes in EX 3300
Hi , My name is Nishanth, and i wanted to know is there any way we can add the description to the static routes in the EX 3300 switch.
View ArticleClik here to view.
Re: A QinQ problem with QFX5100
Yeah It seems in your situation when you create vlan 21, your default bridge-domain begins to processing this vlan without double-tagging. Like if you just want to pass it through the switch or...
View ArticleClik here to view.
Re: Need to know how to add description to the Static routes in EX 3300
It's called annotation https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/junos-software-configuration-comments-adding.htmlin your case:1. Create static routeset...
View ArticleRe: EX4200 log on OS 15.1R5.5
Hi, The same noticed for mx960 , junos 16.1 R4How to stop these messages please ? May 29 13:52:43.136 2017 ALG-KOU-PE-MX960-01-re0 kernel: %KERN-7: rts_commit_proposalmput op: 2, peer_type:17,...
View ArticleRe: EX 3400 Configuring Vlans question
When working on remote devices, another feature you should be aware of is "commit confirmed" If you add "comfirmed" to the commit, your changes will be applied (or the rollback in your case) and if you...
View ArticleEX4300 Config
We are upgrading our environment to from EX4200s to EX4300s, essentially a 1:1 swap out. Are the configurations between the models compatable if I copy it directly over? Any gotchas' to look out for?
View ArticleRe: EX4300 Config
You cannot swap out all of the configurations. A lot have changedShows the main common config...
View ArticleRe: EX 3400 Configuring Vlans question
This is where the documention became fuzzy. I read numerous times that the Vlan-ID should match the Unit ID to keep things organized. So if I create a trunk port and include all the vlans that are on...
View ArticleRe: EX 3400 Configuring Vlans question
Thanks for the heads up on the commit confirmed command. Man would that have came in handy! Along with not allowing the rollback command to roll past the initial config. Thats what "load factory...
View ArticleRe: EX 3400 Configuring Vlans question
Unit number on the interface is just a label that is only locally significant on that interface. The only configuration requirement is that you cannot repeat the unit number on the same interface....
View ArticleRe: EX3400 Mini-USB console
Hi jft-san, I tested on 15.1X53-D56. Whichever of the following commands I use, Both consoles can be used at the same time, and a startup message is displayed only on RJ45. set system ports auxiliary...
View ArticleBetreff: DHCP on EX2300-C?
We have the EX2300-C in production running fine with dhcp - you have to configure the "newer" Version.
View ArticleEX9200 MC-LAG Failover Recovery Times
Hello All, I would appreciate any answers to gain some sort of consensus for my current situation. I currently have two EX9204 chassis configured in an MC-LAG along with VRRP and when simulating a...
View ArticleQFX5100-48S Virtual Chassis on SFP+ port with 80 KM ZR SFP+
Hi Can anyone confirm if i can make QFX5100-48S virtual chassis using 10G SFP+ port. The SFP+ will be ZR with distance upto 80 KM. Any concerns for latency on that. regards Tayyab
View ArticleRe: QFX5100-48S Virtual Chassis on SFP+ port with 80 KM ZR SFP+
As long as roundtrip delay is less than 100 msec, which should be no problem, then this should work just fine.
View Article