EX4300 Virtual Chassis Problems
Hi Everyone,I'm trying to figure out why my virtual chassis is not linking with other switches.Before I installed them, I had everything configured correctly and was working properly.Here is what I...
View ArticleRe: EX4300 Virtual Chassis Problems
I am not certain that I follow your listing. But I think you are saying that you are setting up virtual chassis links by running most of the switche members back to the same common switch. If so this...
View ArticleRe: EX2200 - Junos 15.1R5 - broken Temperature Sensors
Hi all, just wanted to let you know, that I tested 15.1R6.7 on the EX2200-C - and it works.GEPHY1 is shown as "0 degree" instead of "failed" - this does not trigger the temperature-Alarm and therefore...
View ArticleRe: EX2200 - Junos 15.1R5 - broken Temperature Sensors
Thanks for the update. Looks like they added 15.F6 as a version fixed in the PR as well.
View ArticleInstall Software from ftp as "non root"
Hi Community, we want a user to be able to install JunOS Updated via ftp.However when copying the files from ftp to /var/tmp/ the Switch stores the image in the /home/user folder before copying it to...
View ArticleRe: qfx5100-48S: EVPN AND VXLAN
have you tried performing the following on both of your leaf switches: deactivate switch-options vrf-import vrf-importif you do not have this statement in your configuration, then junos will...
View ArticleUnable to activate DHCP on EX3300 switch
Hello, I have been trying to setup a DHCP server on an EX3300 switch, I have been following (https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/dhcp-server-cli-els.html). I...
View ArticleRe: Unable to activate DHCP on EX3300 switch
Hello, Can you share the relevent configuration of DHCP Server and interfaces where DHCP server is configured?Also can you share the output of command 'show dhcp server statistics'? Regards, Rushi
View ArticleRe: Install Software from ftp as "non root"
drop to the shell and and cd /var/tmpthen get the file,
View ArticleDHCP-Relay + firewall on interface
Hi All, I have configured a DHCP-Relay on my EX9200 switch (off topic: **bleep** Juniper made this complex)Everything works fine but as soon as place an input firewall on the interface where the client...
View ArticleRe: Unable to activate DHCP on EX3300 switch
Michael, I think your issue is most likely syntax related. EX3300 does NOT run ELS SW or CLI, but instead is legacy EX product (non-ELS). The correct link for configuring DHCP on EX3300 is:...
View ArticleRe: Unable to activate DHCP on EX3300 switch
Just FYI for you and others. 12.3 code stream for legacy EX products (EX2200/EX3300/EX4200) is going end of support on June 30th. The only code release that will be supported going forward is 15.1...
View ArticleRe: Install Software from ftp as "non root"
I believe he is saying his issue is that since the 1st copy (for non-root user) is to /home/user there is not enough room in this directory for him to get the file into /tmp/var. He is looking for some...
View ArticleRe: DHCP-Relay + firewall on interface
May I ask the purpose of this firewall filter (not firewall)? Without the filter DHCP/DHCP-Relay works, that is permit happens, which seems to be the action you want anyway, yes? I can only guess that...
View ArticleRe: Unable to activate DHCP on EX3300 switch
Hello,Thank you for help, I believe I tried this previously but i will give it another shot. Am I going to follow the instructions under "Configuring a Legacy DHCP Server on a Switch (CLI Procedure)"?...
View ArticleRe: Unable to activate DHCP on EX3300 switch
Hello Again,I tried to follow the instructions to setup the DHCP server and still was not able to get it to work. I am probably doing something incorrectly. Thank you,Michael Here is the config:...
View ArticlevQFX on VMware Fusion - RE won't boot
Hi, I have downloaded and successfully deployed the PFE and RE for the vQFX using vagrant and virtual box. However, as I run most of my other VMs in VMware Fusion, I have tried exporting the VMs as...
View ArticleRe: vQFX on VMware Fusion - RE won't boot
Hi What VMware "Virtual Machine Version" are you using? I've seen such problem with ESXi and VM version 11, then it started working when I used version 8. Also what exact image for RE are you using? I...
View ArticleRe: vQFX on VMware Fusion - RE won't boot
Yep, downgrading to VM hardware version 8 let the RE boot. It was set to11 initially, I believe.I'm currently using the D60 version. I found that the file list for thedownloads for D63 was wrong. There...
View ArticleRe: vQFX on VMware Fusion - RE won't boot
I just downloaded the 600+MB RE VMDK and booted it. Unfortunately it does seem to be the RE image, and not the PFE image. I would say that the D63 PFE image is missing right now. Best to stick with...
View Article