QFX 5100
Hi - We are getting these errors in syslog what does it mean hardware? We already did a reboot on the switch and didnt see anything bad. Mar 3 17:23:57 20050.qfx.vc fpc1 localttp_send: Error (32), buf...
View ArticleRadius and local users
Hello, I have configure radius authentication for ex4200 and everey thing works fine:set system authentication-order [radius password] set system radius-server 192.168.1.2 secret xxxxxxxI have one...
View Articlearp issue on EX4300 with RTG interfaces
Hi,I configured RTG with 2 interfaces on EX4300 switches (junos 14.1), theese 2 interfaces are connected to 2 QFX5100 as in the attachement file. (please see attachement).- spanning tree is deactivated...
View ArticleRe: arp issue on EX4300 with RTG interfaces
This is fixed in 15.1X53-D35, which got released yesterday, Unfortunately this is not called out in the RN, but pre-testing of this released show this situation to be solved.
View ArticleRe: LAG with active/passive links
Yes this requires LACP config, but I think this will still work as long as the Cisco LACP config (I assume this is supported) needs to match exactly on each Cisco switch for their FEC config. This...
View ArticleRe: Radius and local users
Hi zvitins, If the Radius server doesn't reply within 30 seconds to the authentication request from the EX switch the switch will try to authenticate the user using local profiles. What do you mean by...
View ArticleRe: arp issue on EX4300 with RTG interfaces
Thanks for your reply, but you mean 14.1X53-D35 because I don't find 15.1X53-D35 in the download base.I forgot to mention that LLDP is not working eather in 14.1X53-D30.3 . the EX4300 replies to LLDP...
View ArticleRe: arp issue on EX4300 with RTG interfaces
Sorry, yes I meant 14.1X53-D35, not 15.1. Sorry no idea about LLDP, but believe that should work fine, or are you talking about specficially with these RTG connections? I suggest you try 14.1X53-D35...
View ArticleRe: arp issue on EX4300 with RTG interfaces
ok, I'll upgrade to 14.1X53-D35, do some tests and give you feedback.
View ArticleRe: arp issue on EX4300 with RTG interfaces
After upgrading to 14.1X53-D35, everything is working as expected, no more ARP issue and LLDP neighbours table is populated.many thanks.
View ArticleRe: arp issue on EX4300 with RTG interfaces
Good to hear. Can you mark this a solution? Thanks
View ArticleClik here to view.
EX4300-48T with rare behaviour
We recently purchased 5 brand new EX4300-48T switches to replace EX3300-48T switches we have in service (mainly because of the dual PS capablities in EX4300 not present in EX3300).All of them came with...
View ArticleRe: EX4300-48T with rare behaviour
That is the case as: the EX4300 runs a different generation of layer 2 switching and syntax called ELS with also different defaults, commands,.... there is an ELS translator tool available on teh...
View ArticleRe: EX4300-48T with rare behaviour
Alexander, thak you for your reply. I didn't use CLI commands. I did a simple setup using the Web interface. Supposedly, it writes the right configuration lines behind the scenes... or noy ? Thanks,...
View ArticleRe: Over 10km connectivity query
I finally got further information from pre-sales on this greater than 10km limitation, it is the switch model which is an EX4550 the EX4500 can do 1GB over 10km but not the EX4550 at least on 1GB...
View ArticleEX3300 Uplink Performance
At the end of October I moved a EX3300 two member VC from one site to another and had to change the uplink as it now spans a greater distance on SMF instead of MMF, plus it connects to a 3rd party...
View ArticleRe: Radius and local users
Hello, i try to explain: I have local user - user1 and radius user - user1, If I insert radius pasword I log in as radius user, if I insert local password I log in as local user. Also I have one local...
View ArticleRe: Radius and local users
I assume what you are saying is that for the same username, you have different passwords for their Radius account vs their local user account, yes? I am not sure how this would work, but when you use...
View ArticleRe: Radius and local users
No bug, works as designed. You have the following bahaviour depending on the authentication-order configuration as described in...
View Article