EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
I'm a new to Juniper devices and so please tell me if I'm being an idiot. I'm trying to configure an EX4300 switch with an allowed-mac list to limit what devices can connect. This appeared to be quite...
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Hello, Page 95 of the same documents shows CLI procedure for the same. You can search for "Configuring MAC Limiting (CLI Procedure)". Regards, Rushi
View ArticleClik here to view.
Re: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
rtilak I have spent the last 4 hours searching for this configuration statement and not only am I disappointed, I am angry at having to spend so much time trying to a find a very answer to this query....
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
@adisor19 - Do you have this package you could send to me? I cannot find Application package 15.1A3 anywhere on juniper site, just the Application package 15.1R46, which will not install on my EX4200...
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Hello All, Can you try something like this? set vlans [vlan-name] switch-options interface [interface-name] interface-mac-limit 2 set vlans [vlan-name] switch-options interface [interface-name]...
View ArticleHow to configure VLAN-class-map and Rewrite input and Output Queuing on EX4550.
Hello Support. I would like to do the following configuration on EX4550 connect with Catalyst Switch.[topology](VLAN10)...
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Hi lyndidon, Thanks for proving I'm not going mad and for putting in that 4 hrs of effort trying to find these commands which is above and beyond what I expected.So I managed to obtain a spare ex4300...
View ArticleRe: vQFX on VMware Fusion - RE won't boot
I agree the image size looks suspicious, and for me it does not boot at all.
View ArticleSNMP ex9200
Hi, I use prtg to monitor snmp device/juniper ex, for ex2200 and ex3300 i dont face any problem, just setting the snmpv2 community,auth,and clients prtg can query the snmp interface bandwidth/traffic,...
View ArticleRe: SNMP ex9200
Hello, Similar symptonms have been outlined in this link with a solution as well. https://kb.paessler.com/en/topic/43033-no-available-interfaces-on-this-device-code:-pe049 Regards, Rushi
View ArticleCreating Virtual Chassis with EX3400's
Hi All, I'm very new to Juniper and need assistance trying to create a VC with EX3400's. I've searched the Knowlege Base and it seems that the setup is version specific and model specific sometimes....
View ArticleRSTP implementation question
First time poster, I apologize if I am in the wrong place. I also inherited the configuration of this network... so be gentle. I currently have 5 sites which are connected with a L2 service from our...
View ArticleRe: RSTP implementation question
Hi, It is better to put your query on Ethernet Switching forum: http://forums.juniper.net/t5/Ethernet-Switching/bd-p/switch -PL
View ArticleRe: RSTP implementation question
Hello, Theoretically it would be possible. You can have separate RSTP at each site with their own root bridges.You might disable RSTP, enable IGMP snooping, Disable PVST etc. on links facing the...
View ArticleRe: RSTP implementation question
Please view in a fixed-width font such as Courier. +---------+ +---------+ +---------+ | | | | | | | | | | | | | 1 | | 2 | | 3 | | | | | | | +-------+-+ +----+----+ +----+----+ | | | | | | | | |...
View ArticleRe: Creating Virtual Chassis with EX3400's
Hi Folks,Please find some pointers on the same,...
View ArticleRe: DHCP-Relay + firewall on interface
Thanks for thinking with me! The subnet is a public hosting network. The filters (in + out) are in place to protect the subnet from the internet.As soon as the IN filter is applied, the DHCP request...
View ArticleRe: RSTP implementation question
Is your intention to keep all the sites in the same VLAN and broadcast domain? If so, then some version of spanning tree is advisable for loop prevention across the entire domain and your current issue...
View ArticleClik here to view.
Re: Install Software from ftp as "non root"
Exactly. Even if I go to the shell and cd to /var/tmp It still copies to /home/user before moving this internally to /var/tmpOnly root is able to move directly to /var/tmp it seems
View ArticleRe: Creating Virtual Chassis with EX3400's
I suspect based on your description that perhaps not all of the setup for your pre provision VC was removed before you did this new setup leading to the inconsistent results. The other item to be aware...
View Article