Re: QinQ QFX and EX
HI This is one sample config which I have tested see if this helps QinQ ELS Configs+------------------+ +------------------+ +--------------------+ +--------------------+|...
View ArticleRe: How can do bandwidth control inet/inet6 for QFX 5100?
Does this help? https://www.juniper.net/documentation/en_US/junos/topics/topic-map/policer-single-rate-two-color-bandwidth.html set interfaces ge-1/3/0 per-unit-schedulerset interfaces ge-1/3/0...
View ArticleRe: Strange logmessages: "IFCM: no handler for command subtype XXX"
HI These are harmless messages and they appear when the LC had already deregistered and shouldnt get any messages from RE. https://prsearch.juniper.net/PR709088 ThanksPartha
View ArticleRe: Any impact when EX Switch configures Secondary IP address for a Vlan.
HI Sir There should not be any impact you can add the secondary IP addresses....
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
HI There is allowed mac config in ethernet switching options is this not working ? set ethernet-switching-options secure-access-port interface MACSEC allowed-mac 00:13:72:71:8a:32 ThanksPartha
View ArticleRe: Creating Virtual Chassis with EX3400's
HI This is what I would suggest lets say we are needing a 4 member VC 1) Zeroize/FD all the 4 members.2) Take one switch which you wan to be master, configure this with preprovisioned.3) Make sure all...
View ArticleRe: DHCP-Relay + firewall on interface
HIFirst why do you need the filter to accept the packet, by default the packet would be accepted and fwd to the kernel. If you still want the packet to be filtered for counting/logging purpose just use...
View ArticleRe: QinQ QFX and EX
Hi Partha, thanks for you quick response. I have validated and it seems that I have the same configuration, but it is still not working. However I have one additional element in my scenario: a EX4550...
View ArticleClik here to view.
Re: How can do bandwidth control inet/inet6 for QFX 5100?
logical-bandwidth-policer is unsupported
View ArticleAfter software update dont see /dev/md7, mounted on:...
Experts, Looks like after updating software from 12.3 to 15.1 some folders are missing: /dev/md7, mounted on: /packages/mfs-jkernel-ex-3300 however show system storage shows: show system...
View ArticleRe: Filter traffic sent to analyzer
The issue with mirroring all traffic is why I am here originally. The problem is we are reaching the ports capacity. It seems the only solution is to mirror ingress and include the upstream port.
View ArticleEX2200C after upgrade to 15.1R5 license error
Experts, I don't know if I should just ignore this message but this can't give me relaxing time when I see errors like this: Jun 19 07:06:18 storeroom /kernel: Percentage memory available(18)less than...
View ArticleRe: Creating Virtual Chassis with EX3400's
Other than the Master, do the remaining switches to be added to the VC need any config, assuming they were zeroized and immediately powered down?Is it best practice to power on member switches and THEN...
View ArticleRe: Creating Virtual Chassis with EX3400's
Confirm the same version of Junos as the master is installedConnect the switches via the VCP cablePower the switch on and it will automatically add to the VC I usually do this one switch at a time.
View ArticleRe: EX2200C after upgrade to 15.1R5 license error
I used install --format with 15.1R5 as advised by Juniper also: Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo t/modules;/modules/peertypeLoading the CHMIC module...
View ArticleRe: EX2200 - Junos 15.1R5 - broken Temperature Sensors
I have upgraded 2200C to 15.1R5 as advised by juniper tech and experiencing same bug ..... I dont know if I should trust Juniper tech or just Juniper forum since you users have more accurate info .......
View ArticleClik here to view.
Re: 802.1x broken in Junos 15.1R5.5
bug after bug - 15.1R5 - 2200C temerature sensor bug ...............
View Articleshow ethernet-switching statistics on EX4200
Is there a way to check for extensive unicast flooding on an EX 4200 switch or, even better, on a single port of the switch? Regards,Pawel
View ArticlePort filtering with an EX3300
Is it possible to block all traffic from port _x_ from all hosts except one IP, but at layer2 using the EX3300's port filtering? I attempted using the commands and GUI as per;...
View ArticleRe: MX Q-in-Q With Multiple Inner Tags not working
I finally solved this on my own. I combined the two bridged inner vlans 127 & 999 on a trunk interface with the inner-vlan-id-list. This is the config that works: user@FTMY-T3-EDGE-01# show...
View Article