Re: Port filtering with an EX3300
Yes it is possible. Post your filter. As the article indicates you can add hundreds of terms and filters with basically line speed performance.your firewall should have two terms:term 1 match from...
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Take look at the complete discussion. The hierarchy "ethernet-switching-options secure-access-port " is not available on ELS as already observed in the discussion and the links to juniper documents.
View ArticleRe: EX4300 Port Security - MAC Limiting (Allowed MAC) & ELS
Finally! I hope this is rthe solution!OMG!! It took using the ELS translator to find the correct way to enable this featureJunosset ethernet-switching-options secure-access-port interface ge-0/0/2...
View ArticleRe: QinQ QFX and EX
Hi, I finally updated the JUNOS to the latest version and it worked fine (using your configuration) Thank you for your help Ezequiel
View ArticleRe: show ethernet-switching statistics on EX4200
Hi pmazurkiewicz You can configure unknown-unicast-forwarding on EX4200 to get to know more information....
View ArticleRe: Port filtering with an EX3300
Any filter I add, seems to stops packet flow for everything all together!Maybe I need a filter to Allow All initially? Then the rest of the filters? Here's the only filter I added testing just...
View ArticleRe: Port filtering with an EX3300
It is much easier to help when you provide the configuration that you have applied. Also be very clear in explaining what you want to achieve. If using the GUI, their is an option to display the text....
View ArticleRe: show ethernet-switching statistics on EX4200
Hi, Not sure if I understand you fully - if i set a port for unknown-unicast-forwarding it will stop flooding unknown unicast to other ports - possibly braking comunication... Regards,Pawel
View ArticleRe: show ethernet-switching statistics on EX4200
This is more like a security feature. When you configure unknown-unicast forwarding for a VLAN and destine it to a interface, no matter what port the traffic comes in that particular VLAN with the...
View ArticleRe: show ethernet-switching statistics on EX4200
But how it can help me with my problem? I need to learn what level of flooding is there, and maybe find what MAC addresses are involved. Regards,Pawel
View ArticleRe: show ethernet-switching statistics on EX4200
The show ethernet-switching table command shows that an unknown unicast packet is received on interface. Check the link which i pasted before. ThanksArul
View ArticleRe: show ethernet-switching statistics on EX4200
Then as I said before - if i set a port for unknown-unicast-forwarding it will stop flooding unknown unicast to other ports - possibly braking comunication. Regards,Pawel
View ArticleRe: show ethernet-switching statistics on EX4200
try this:>show interfaces <name> extensive | match packets You can specify an interface name of leave it off. This should show you multicast, unicast and broadcastNow that will not tell you if...
View ArticleRe: EX2200 - Junos 15.1R5 - broken Temperature Sensors
Hi Chris, Yes. There is issue in 15.1R5 Junos version for temperature failing in EX2200 device. Please find PR details which is fixed in 15.1R6 Junos version. PR 1255421 - Temperature sensor failing /...
View ArticleRe: EX2200C after upgrade to 15.1R5 license error
Hi, Have you already done the steps mentioned in the below KB article? https://kb.juniper.net/InfoCenter/index?page=content&id=KB18951&act=login
View ArticleRe: Filter traffic sent to analyzer
Hi , Few legacy EX devices wont support egress filter which is hardware limitation. May i know which model of juniper device you are using.
View ArticleRe: After software update dont see /dev/md7, mounted on:...
Hello, There is software architecture change between 12.x and 15.1 Junos version. May i know if there is any impact or issues after upgrade?
View ArticleRe: EX9200 MC-LAG Failover Recovery Times
Hello, Could you please use the below configuration and update the status? set protocols iccp local-ip-addr 1.1.1.2set protocols iccp peer 1.1.1.1 session-establishment-hold-time 50set protocols iccp...
View ArticleClik here to view.
MCLAG to MCLAG
Hi,I have 2 QFX10002 switches CORE, already with ICCP/ICL configured.I have 2 QFX10002 switches DISTRIBUTION, already with ICCP/ICL configured. ICCP/ICL is ok.I wan to connect them like this schema,...
View Article