Re: Tail-dropped packets on 30Gb AE while only ~8Gbps at max
Hello,Check if You have flow-control enabled & are receiving PAUSE frames from neighbor:{master:0} lab@ex> show interfaces xe-0/1/0 extensive | grep "pause|flow" MAC-REWRITE Error: None,...
View ArticleRe: How can do bandwidth control inet/inet6 for QFX 5100?
Is thre a way to implement logical-interface-policer feature for qfx series?
View ArticleRe: EX2300 & Ex3300 VC Licenses over deployment scenario
Thanks. This really helped me alot. Sorry for late reply.
View ArticleRe: QFX3500-48s4q-acrb stuck in virtual chassis/linecard config
Sorry, I did not read closely enough. There is a potenial issue with split detection on devices that are alone after having been in a virtual chassis. Try adding this line to the configuration and...
View ArticleSetting up a new Virtual Chassis on EX3300
Hi, I am looking into turning an EX3300 switch into a Virtual Chassis with 2 additional switches, making it 3 switches all together. I've found many articles online explaining how to do this however I...
View ArticleRe: EX2200 - Junos 15.1R5 - broken Temperature Sensors
Since 12.3 is now officially recommended and has EOE until 2020, I will stick with 12.3
View ArticleEX9208 R14 migration from VCP to VRRP and upgrade to R16
So in the PR for R16 it shows that juniper stops support on VC. I am needing to move from R14.X to R16.X so that I can finally have LRm optical support for my client that has a surplus of LRMs. We...
View ArticleHow many IRB interface suppoed on EX switch?
Hi ,Does there have any document description for how many IRB interface supported on EX switch ?Like:Cisco Nexus 3K suppoed 1450 SVI Extreme X670 suppoed 2000 SVI Thanks for your answer .
View Articlevme.0 up/down on new QFX5100 VC pair
I'm installing a new set of QFX5100s and am having difficulty with the vme management interface. I have two QFX5100s in a VC pair, and have C0 (em0) on each QFX5100 connected to our management network....
View ArticleRe: How many IRB interface suppoed on EX switch?
Ask Jewels to move this to Switching. Could not find EX but located QFX.Wish we could get alittle bit more consistency with docs, Platform Number of Supported IRBs/RVIsQFX3500 1200QFX3000-G...
View ArticleEX4200 MACs relearned from other UP ports
Hello, I have a little issue related to the MAC learning by a standalone switch. My setup is very simple - two end stations connected to one switch, MAC dynamically learned without any issues, pings...
View ArticleWeird behaviour ex4600 and 10Gig sfp+ ports
Hi!I have expirienced with a weird behaviour our EX4600 switch. I add sfp+ module at port and see that this port becomes up without any cables. What is a reason?All leds on port are green sfp - 10GBASE...
View ArticleRe: EX4200 MACs relearned from other UP ports
alcornet wrote: It seems I experience MAC flooding and looping through interswitch paths which dont run stp/rstp and no trunks. This all points to a simple L2 loop. Either examine you table as you...
View ArticleRe: vme.0 up/down on new QFX5100 VC pair
Hi Stafford Please check em0.0 is configured on the switches in the VC and If configured delete the em0.0 from the switches and configure vme0.0 only on the master switch and check the reachability....
View ArticleRe: EX4200 MACs relearned from other UP ports
Hi Alcornet As soon as I activated other ports connected to other 4200 switches with default config e.g. no trunks configured, no STP the MACs start bouncing in the table. MACs are constantly being...
View ArticleRe: Weird behaviour ex4600 and 10Gig sfp+ ports
Hi Roman Is the SFP Juniper qualified ? Can you please give me the ouput of run show chassis pic pic-slot 0 fpc-slot 0 and run show chassis hardware detail ThanksArul
View ArticleRe: EX9208 R14 migration from VCP to VRRP and upgrade to R16
Hi lledar "So in the PR for R16 it shows that juniper stops support on VC"What PR you are talking about ?Can you please give me the PR numnber ? I dont understand the description, Migration from VCP to...
View ArticleRe: Setting up a new Virtual Chassis on EX3300
Hi VIshal Can someone advise whether when configuring the active switch into a Virtual Chassis master, does this require downtime? Ans: Adding a new member as a linecard will not require any...
View ArticleRe: QFX3500-48s4q-acrb stuck in virtual chassis/linecard config
Hi mdpeel What is the image verison you are running on this ? Can you try and load 14.1X53-D42 and check if you still see issues with chassis control subsystem? ThanksArul
View Article