Re: VRRP Subsystem Not Running - 2x EX2200-C
Your config looks normal, but two notes:1. Juniper no longer recommends 15.1 on ex2200 due to insufficient memory. Any way you can roll back to 12.3?2. You've duplicated your virtual and real IP on...
View ArticleFilter based routing on ex2200
Hi all! I have EX2200.Trying to set up Filter Based Routing.Why i can't see router-instance in firewall settings? Need I EFL for it? root@EX2200-CORE# set firewall family inet filter Foton_Fbr term 1...
View ArticleRe: Filter based routing on ex2200
Hi , Looks like EX200 does not support Routing-Instances. You can go through below thread on Juniper forum. Policy-based routing on the EX 2200? [KUDOS PLEASE! If you think I earned it!If this...
View ArticleRe: IP Accounting?
I've used jflow on Juniper routers to both the open source nfsen and commercial tools. This is not full packet captures but sampled flow records that you can see the types of traffic and do reporting....
View ArticleRe: Fluking Ports
Thanks, I didn't notice that the change was only occuring per hardware platform. I have all configured correctly on Juniper and Fluke. When Upgraded to 15.X on Juniper now I see only port description,...
View ArticleRe: Filter based routing on ex2200
in version 12.3r12.4 forwarding instances are supported on the ex2200 root# set routing-instances new instance-type forwarding {master:0}[edit]root# commit checkconfiguration check succeeds
View ArticleRe: Storm-Control: Logging Instances of bandwidth limit being hit
Hey B2, In order for you to see the storm control in effect statement in your logs, you would have to configure your syslog facility to any and then your syslog severity level to alert (1) or even...
View Article12.3R12-S6
12.3R12-S6 came out on Thursday with no release notes or documentation -- does anyone know what this release addresses?
View ArticleRe: Filter based routing on ex2200
I have no problem with creation routing-instance.But there is no same option in firewall filter. show routing-instances Foton { instance-type...
View ArticleRe: Filter based routing on ex2200
You are right the routing instance action item is not on firewall filters for my ex2200 but is there on the ex4200 series both are on Junos 12.3.
View ArticleRe: 12.3R12-S6
S Releases do not come out with RNs. You can find the details of 12.3R12-S6 at this KB (17178): https://kb.juniper.net/InfoCenter/index?page=content&id=TSB17178&actp=SUBSCRIPTION
View ArticleHalf-Duplex
Hi all, is there a document, which shows on what models half-duplex is supported?On the last summit it was mentioned, that some newer Chipsets do not support half-duplex anymore.
View ArticleRe: Half-Duplex
10/100 HDX is now supported on all models of both EX and QFX, using later code. The situation applied previously to EX4300/EX3400/EX2300 but was resolved with 14.1X53-D40 and all future releases and...
View ArticleRe: Half-Duplex
So the "this is limited by the Chipset" was a wrong Info from Juniper???This was just a Software-Limitation?
View ArticleRe: Half-Duplex
There was actually a "standard" limitation from the vendor chipset, and Juniper need to work with Broadcom SW Developer's Kit to work-around this to get this to work. Of course there were also issues...
View ArticleClass of service config error
Can anyone explain the cos check-out failure I'm getting on a QFX-5100? I am also seeing this on an EX-4600. set class-of-service interfaces et-0/0/16 unit 0 classifiers dscp test-classifier set...
View ArticleRe: BPDU filtering
I cannot explain why somebody would want bpdu filter on an untrusted switch port. Seems like a horrible idea to me. I would want to know if someone looped a port on me. Instead I would guard root and...
View ArticleRe: Class of service config error
Hi Paul, On QFX-5100, I think we don't support classifier and rewrite configuration on logical unit. We only support it only physical interface, that's why I think you are getting commit error, please...
View ArticleRe: Class of service config error
Yup, it commits if I remove the unit specifier--thanks!
View Article