Re: Weird problem.
telnet from virtual chassis work to all switches. Everything works except for ssh and jweb Sorry I missed this line from the original post. Can you check that SSH and web mgmt are enabled in the system...
View ArticleRe: Weird problem.
I have encountered something similar to this problem twice on SRX devices that were running MPLS. i could ping comfortably but ssh and telnet were not working. finally it turned out to be MTU problem...
View ArticleRe: Weird problem.
Hi and thank you for replying. To answer yes SSH is enable on every switch, service restarted, even restarted web-management. Hmmm MTU well gonna have to check that, never even thought of it, well we...
View ArticleRe: Upgrade of EX4550 to latest recommend version
Thank you for the feed back, yes it was only to stay on JTAC recommended vesions. I don't think there was anything in vesion 15.1 that we needed so I will stay with vesion 12.3 for now.
View ArticleRe: Weird problem.
If the issue is MTU, you can check this very easily by pinging with 1500 bytes packets, vs ping default of 64. FYI only.
View Articlevqfx physical interfaces not showing up
Hi, I am spinning up full-1vqfx using vagrant. I am not able to see any physical interfaces avaialble in the output of show interface terse. I have allocated 4 vcpu and 8Gb RAM to my ubuntu vm on...
View ArticleRe: CWA in EX switches
Can you post your relevant config ?Here are two other links which you can also...
View ArticleHuge latency between two ex switches
I have two EX VC's connected to each other with two point to point links. The primary link is showing a latency of 8000ms pinging across it and the carrier is saying the circuit looks clean. There are...
View ArticleEX unable to log in with SSH
This is a strange problem, that has happened to several of our EX switches.I am unable to log in with ssh, or telnet. Was able to log in several days ago.Noticed it was down in SPACE, so I tried to...
View ArticleRe: Strange log messages in EX2300
We were getting the same log messages on our new ex2300 switches. This is how I fixed it. I am not a Juniper engineer, so I will not go into detail about why this happens or how these changes fix the...
View ArticleRe: EX unable to log in with SSH
Which exact switch EX model, and what version of Junos are you running with?
View ArticleRe: Strange log messages in EX2300
Maybe to assist is could you respond with: 1. What version of Junos are you using?2. What is the exact log message you [were] seeing?3. Where is the DHCP Server located ? Is there just one (maybe...
View ArticleRe: CWA in EX switches
I don't think it will make any difference, but I might suggest for EX4300 running 14.1X53-D45, and 12.3R12 (or 12.3R12-S6) on your EX3300, versus 15.1[period], even R6-S3. I know this functionality...
View ArticleRe: SNMP ex9200
Hi all, Trying to ask old issue/thread.I can query/snmp to my ex9208 for example oid for temp, memory, cpu usage, but why i cant query the interface statistic ?If i do snmp walk from the core it self...
View ArticleUpgarde proccess for Ex switchs
Hi, I need to upgarde all my Ex switchs, i read all about: "Support for upgrades and downgrades that span more than three Junos OS releases at a time is not provided, except for releases that are...
View ArticleRe: Upgarde proccess for Ex switchs
#1 not sure if you are aware but support for 12.3 code releases has been extended until [at least] June 30 2017. Based upon this, and I am unsure your exact reason for upgrading, but I might suggest...
View ArticleRe: Upgarde proccess for Ex switchs
Hi, Thanks for response, Ypu said that 12.3 code releases has been extended until [at least] June 30 2017 now is 28-Sep-2017 and if iam look at this: http://www.juniper.net/support/eol/junos.html#1I...
View Article