Re: EX2300 48P port role
Just to add on to lyndidon response, there is not such command syntax such as port role = L2Uplink. To create such a design you set the interface port-mode to trunk, and then make the interface a...
View ArticleRe: Q-in-q svlan and normal vlan on same trunk, ex4600, els
I dont have ELS but on Junos the syntax is:set ethernet-switching-options dot1q-tunneling ether-type 0x8100I do not have ELS to test or rtell correct syntax
View ArticleRe: Q-in-q svlan and normal vlan on same trunk, ex4600, els
Try this: set interface ge-x/y/z ether-options ethernet-switch-profile tag-protocol-id Does this help? ELS Translator does not translate this properly, if indeed the syntax above is correct. BTW, I...
View ArticleNative VLAN ID
I'm trying to configure an access port on an EX3300 and I get this error: [edit interfaces ge-3/0/0 unit 0 family] 'ethernet-switching' Access interface ge-3/0/0.0 cannot have native-vlan-iderror:...
View ArticleRe: Native VLAN ID
Native-VLAN-ID only applies to Trunk/Tagged interfaces, not Access (non-tagged) interfaces. This concept cmes from Cisco, a long time ago, and is generally only required when Juniper switch/device is...
View ArticleRe: Native VLAN ID
Show us configuration of this interface and we will tell what piece is causing problemsswitch#show interfaces ge-3/0/0Regards, Wojtek
View ArticleCan EX-3300 send LLDP Proprietary TLVs?
We mostly send boot options to our Avaya VoIP phones via DHCP options. However, in a few specific cases, it would be easy to send specifc data to the phones based on the access switch they are...
View ArticleRe: Can EX-3300 send LLDP Proprietary TLVs?
Juniper switches only support 'standard' TLV, and do not [yet?] support the setting and sending of proprietary LLDP TLVs. From what I understand only the latest model Avaya (now Extreme) switches...
View ArticleRe: Can EX-3300 send LLDP Proprietary TLVs?
Sorry I meant to send this doc link as well: https://www.juniper.net/documentation/en_US/junos/topics/concept/802-1x-lldp-lldp-med-understanding.html
View ArticleSpanning Tree Bridge Assurance
Hellow Everyone, Does Juniper have the same features as spanning bridge assurance? Thanks
View ArticleClik here to view.
Re: Spanning Tree Bridge Assurance
Short answer no (I believe). Long answer is that (I believe) this is Cisco proprietary extension to STP, and is not part of the 802.1d/STP standard: [from Cisco doc] Bridge Assurance is supported only...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello,any news about this 802.1x issue?Is it finally fixed with the release of 15.1R6.7 ?
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Are you asking specifically about PR1241326, for EX2200/EX3300? If yes, then this PR is fixed in 15.1R6. Please note that for EX2200, 15.1 is NOT recommended to be used, and I might caution it use...
View ArticlePut interface on VLAN of inner tag of Q-in-Q
HelloI am just wondering whether it is possible to have a outer tag that is passed between two trunks and have an inner VLAN from that put onto another interface. This is on an EX2300.Example:ge-0/0/0...
View ArticleStorm Control on trunk interfaces ?
Hi all,I guess this is a stupid question, but I couldn`t find meaningful statemenst to this question.So I would like you to aks:Is it possible to configure storm-control to a trunk-port ?And if...
View ArticleRe: Native VLAN ID
delete interfaces ge-3/0/0set interfaces ge-3/0/0.0 family ethernet-switching port-mode or interface-mode access (which ever command works on that device.Are you certain it is the t interfaces ge-3/0/0...
View ArticleEX 200 ans Scheduler priority
Hi everyone, On EX 200 we have only two scheduler priority Strich High and low. My question can I use two traffic classes T1 and T2 with rate limit with both STRICT HIGH ? Basicaly I would EX to do...
View ArticleRe: Issues with firewall filter on Juniper EX4550
Hi.Can I ask if You resolved this problem. I have the same with ex4550.Regards.
View ArticleRe: Issues with firewall filter on Juniper EX4550
Hi,Looks like this is a bug with specific Junos version. So I believe the update will fix this issue. But in our case we can't perform an updated because any downtime is not acceptable for us, so we...
View ArticleEX4600 DDOS Violation show Portinfo
Hi Guys, is there any possibility to show on what Port a violation occured?I found...
View Article