Re: Problem with EX3300 LLDP Discarded TLVs (Junos 15.1R6-S2.1)
Just wondering if you know, but did this functionality work with any 12.3 Release?
View ArticleRe: pure L2 multicast traffic (no multicast ip traffic) not forwarded
Can you capture just this packet with Wireshark, and include? TAC case opened? Maybe send case number.
View ArticleEX 4600 FBF config
Hi All,I have a following requirement to configure FBF as follows.1. Internet traffic should always prefer ISP2.2. Intranet (10/8, 172/16) should prefer ISP1.3. Intervlan traffic should be AS IS.4. We...
View ArticleRe: EX 4600 FBF config
Answer can be found here: https://forums.juniper.net/t5/Ethernet-Switching/Filter-based-forwarding-on-EX4600-EX4300-mixed-virtual-chassis/td-p/286824 Found via Google search for EX4600 FBF.
View ArticleRe: EX 4600 FBF config
Thanks for response..but it has not worked..(i.e. the pasted thread)..
View ArticleRe: EX 4600 FBF config
no..as ex series switches has got issues with directly connected routes..so..
View ArticleEX4600 interface naming?
In several weeks we will take delivery of two EX4600s to replace two EX4500's at the core of our network. I want to get a jump on the layout of the interfaces before these switches arrive. This is what...
View ArticleRe: EX4600 interface naming?
Assuming this is first unit in the VC (member 0), the 0/0/0-0/0/23 are the 24 1/10 SFP/SFP+ interfaces. The 4 x 40GE would be 0/0/24-0/0/27. When you channelize these ports are named 0/0/26:0 -...
View ArticleDisable 40gb Port Channelization on EX4600?
I have just taken delivery of several EX4600 switches. THese will be stacked with a couple of EX4300 switches. Looking at the configuration it shows that the 4 40Gb QSFP ports are apparently...
View ArticleRe: Problem with EX3300 LLDP Discarded TLVs (Junos 15.1R6-S2.1)
I don't know if it worked before cause I updated the EX3300 before installing them and connecting to EX4300.I run traceoptions for lldp with flag all on the EX3300 and EX4300.EX3300 LLDP log -...
View ArticleRe: Disable 40gb Port Channelization on EX4600?
To my experience the ports are not channelized per default - but have experienced this behaviour with cheap QSFP DAC cables from China. When using a properly coded cable, no issue occured. If you...
View ArticleAuthenticate EX4300 with Cisco ACS server
Hello Experts, I'm a newbie to Juniper!I have a got a couple of EX4300 which I am trying to authenticate against a Cisco ACS server using Radius. I see that authentication requests are reaching to...
View ArticleRe: Disable 40gb Port Channelization on EX4600?
Hmm. these switches are brand new out of box and the QSFP+ ports which are listed as et-0/0/24 through 27 are showing as all having sub ports of xe-0/0/24:0, xe-0/0/24:1. up to 24:3 and the same for...
View ArticleEX4300 Not Passing DHCP
I have a support case open, but the engineer want to try reproducing the issue in their lab which could be a few days. So I thought I'd, ask the community as well. The switches in question are EX4300s...
View ArticleL3 Interface in Ex4300 switch
Hello,Can anyone please confirm if this is right way to convert an L2 switch to a L3 routed ported in Ex4300.user@EX4300-2> show configuration interfaces ge-0/0/17 unit 0 { family inet { address...
View ArticleRe: EX4300 Not Passing DHCP
You might want to post your config so folks can take a look.
View ArticleRe: L3 Interface in Ex4300 switch
Hello,This looks to be correct. Please ensure you delete the default family ethernet-switching config if any. Refer below...
View ArticleInterface list disapear
Hi,We have restored configuration file on EX4200 and successfully commit the configuration. All interface configuration already there on EX.But while i run "show interface terse" command, there is no...
View Article