ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Hello,Does anyone know how Ex4200 EX-UM-2X4SFP.works? If we can use 1G +10 mix or we can only use all port as 4x1G and 2x10G at same time?Right now we have two fiber coming and one support 10G and...
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Sorry, on the 2x4SFP Uplink Module, you can mix and match 10GE and 1GE. You must set the PIC speed as first step, which is either 1GE or 10GE. From this link -...
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Hello,Can you tell us how to do that on ex4200?For e.g. if we want to use port number 2 as 1G and port number 3 as 10G. What commands we have to run to set the port speed.?Thanks in advance.
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Hi Folks,EX-UM-2X4SFP is supported in both EX4200/EX4300. Please find the Hardware Compatibility Tool. https://pathfinder.juniper.net/hct/model/?component=EX-UM-2X4SFP&tab=sPlatforms Note: When an...
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Adding to the above information...Setting the Mode on an SFP+ or SFP+ MACSec Uplink Module (CLI Procedure) SFP+ uplink modules are supported on EX3200 and EX4200 switches, and SFP+ Media Access Control...
View ArticleClik here to view.
Re: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Sorry, thought I had responded to this already. My original posting had a BIG typo in it. My 1st sentance should have read:orry, on the 2x4SFP Uplink Module, you can NOT mix and match 10GE and 1GE."...
View ArticleEX-UM-4X4SFP module
Can I the ports be configured as host access ports? I want to connect some new servers via 10GbE.
View ArticleRe: EX-UM-4X4SFP module
I assume you are using this with an EX4300. Answer is yes - interfaces do not know if being used for uplink or service/device connectivity. These interfaces can be configured/used just like any of...
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
Just as another point, there might have been a typo in one of python 1st reply. The 2x4SFP is supported on EX4200 and EX3200, NOT on EX4300. This module does NOT support a mix of speeds. You must set...
View ArticleUsing configuration group to apply configuration to ports across linecards?
Hey all, I'm looking for a way to get Juniper to recognize wildcards properly across linecards and ports. I looked at the document here:...
View ArticleRe: Using configuration group to apply configuration to ports across linecards?
Ugh. After reading around a bit more I came across this: https://forums.juniper.net/t5/Ethernet-Switching/Groups-applying-configuration-to-wrong-interfaces/m-p/282271#M13118 so apparently this is...
View ArticleRe: Groups applying configuration to wrong interfaces
Thanks man. I was wondering what the deal was with this. 3 years later, apparently still like this.
View ArticleRe: Groups applying configuration to wrong interfaces
Hi Folks,Just my 2 cents on this… If you find something is missing in Junos; and there is a real use case, Always free to open Enhancement Request (ER)....
View ArticleRe: ex4200 EX-UM-2X4SFP.module support 1G +10G or all port 4x1g or 2x10G
My bad... there was a typo.... EX-UM-2X4SFPEX4200 and EX3200 2-Port 10G SFP+ and 4-port SFP Uplink Module (optics sold...
View ArticleRe: show interface description JWEB failed
on ex2200 with JUNOS 15.1R6.7 built 2017-04-23 01:54:51 UTC, now, all work correctlyon ex3200 with JUNOS 14.1X53-D46.7 built 2017-11-24 01:23:14 UTC - no descriptions in web interaface
View ArticleRe: show interface description JWEB failed
Hi Folks,I could find a closely matching PR, PLEASE UPGARDE TO THE FIXED RELEASE Resolved In15.1R4 15.1R5 15.1F7 https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1188038
View ArticleRe: show interface description JWEB failed
ex3200 not supported by 15.xhttps://kb.juniper.net/InfoCenter/index?page=content&id=TSB17033&pmv=print&actp=LISTso, I cannot upgrade to 15.1R5
View ArticleRe: show interface description JWEB failed
Yes, you should not run either EX2200 or EX3200 on any 15.1 code. Therefore I still suggest you try 12.3R12-S7 or S-latest. This lPR ooks to potentially be an issue introduced in 15.1 code stream, as...
View ArticleRe: show interface description JWEB failed
I rollback ex3200 to jinstall-ex-3200-13.2X51-D35.3-domestic-signed.tgz (it's not avalible now, but I have saved package), it's work correctly and run on ex2200 - 15.1R6 -...
View Article