What does the * aka asterisk symbol mean on a virtual chassis ?
Shown by the master here user@switch> show virtual-chassisVirtual Chassis ID: 0019.e250.47a0 Virtual Chassis Mode: Enabled Mastership Mixed Neighbor List Member ID Status Serial No Model priority...
View ArticleRe: dhcp snooping in MX
If you do come up with information on this not being supported on some cards, I would appreciate that. I will continue through digging in the meantime, but as fart as I can tell, a bridge domain is...
View ArticleRe: dhcp snooping in MX
BTW, did you open a case on this with TAC? I would assume you have support on an MX.
View ArticleRe: What does the * aka asterisk symbol mean on a virtual chassis ?
Hi, The * indicates which member within the virtual chassis that is managing the connection. If you session into the backup RE and run the same command you will see the * moves to the backup. request...
View ArticleRe: What does the * aka asterisk symbol mean on a virtual chassis ?
That info is shown here under Role https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-virtual-chassis-status-mx-series.html but is not shown here...
View ArticleRe: dhcp snooping in MX
I may do that. In the meantime, 15 other vendors do what the MX can't. So I have a work around. Just annoyed at the juniper documentation error.
View ArticleRe: dhcp snooping in MX
@ elivaughan - I do understand your frustration, and can only say that Juniper is trying to improve their documentation every day. As for those 15 other vendors, I fully expect that the MX can do a...
View ArticleProvide a static DHCP reservation with no router information
I am running a legacy DHCP server on an EX3300 (v12.3).I have a few server interfaces that I want to address with DHCP reservations from within an existing pool but I DO NOT want them to receive a...
View ArticleBroadcast storm, loop, flood how to find from where the dissasters camming?
Hi, how can I find, what is wrong with my network? My topology is with access Cisco switches, distribution switches and Cisco core switches but the Cisco core switches they are in stack. And everything...
View ArticleRe: Broadcast storm, loop, flood how to find from where the dissasters camming?
RSTP may have decided on a Root switch different from what it shold be. Apparently, QFX should be Root.Also, RSTP on Juniper is standard 802.1w [one instance] while Cisco is proprietary Rapid PVST+...
View ArticleRe: Broadcast storm, loop, flood how to find from where the dissasters camming?
One QFX is Master and one another QFX is backup.The master QFX Juniper is root.
View ArticleSOLVED: DHCP server assigning addresses from wrong pool
2nd DHCP issue in as many days. EX3300 running legacy DHCP server is incorrectly distributing addresses from an adjacent pool. Output from dhcp_logfile shows the DHCPDISCOVER being received on...
View ArticleRe: Broadcast storm, loop, flood how to find from where the dissasters camming?
Do you read the same on all Cisco switches as well? Thanks.
View ArticleQFX5100 interface drops
Hello, I have a pair of QFX5100's configured as MC-LAG peers. I have an MC-LAG going up to an MX5 router - ge-0/0/41 on both QFX5100-A and QFX5100-B connect to MX5. The problem is I'm seeing drops in...
View ArticleExtend Existing Network Without Adding Switches to Virtual Chassis
Good day, everyone. My background is primarily Cisco, so I'm still cutting my teeth on Juniper's way of doing things. We have a virtual chassis composed of four EX-3300 48-port switches: One master,...
View ArticleRe: Dynamic vlan and port bounce
I am currently trying to do something similar. I think you need a new feature to be supported in Junos called 'port-bounce'. This is where the RADIUS server sends a COA (Change of Authorization)...
View ArticleRe: dhcp snooping in MX
You could very well be correct. These are older line cards, so that could actually be the reason for the documentation lagging the feature. Which is fine, as long as that is the case. I'll buy new...
View ArticleEx3300 Virtual Chassis preprovisioning issue.
Hi Guys, I have an interesting issue. I have a 2 member VC where I am using preprovisioning. However that info seems to be getting ignored by the switches upon reboot. Even if I stagger the reboots the...
View ArticleRe: Ex3300 Virtual Chassis preprovisioning issue.
Hi , What is the JUNOs version running?What if you shutdown member 1, is member 0 continue as linecard? Did you try to reactivate mastership by issuing the command>request virtual-chassis reactivate...
View ArticleRe: DHCP options 43
I've same situation.this evening I'll try as you described. regards
View Article