Re: qsfp+ SR4 distances when splitted into 4x10GBaseSR ifs
I would say 1). This is what is reflected in various materials. It could easily be that Cisco has an optic which deliver 300m or 400m on OM3/OM4 so I think you should trust your Juniper representative...
View ArticleRe: EX3300 virtual chassis
As long as it's two EX3300 switches it will work, both with 24 or 48 ports and PoE/non-PoE versions. /Jonas
View ArticleRe: EX3300 virtual chassis
So I understand that it does not matter if two different platforms in cluster , cluster setup is still going to work ? OK .. thanks
View ArticleRe: EX3300 virtual chassis
Hello, Two different models of the same parent device i.e. EX3300 can have a cluster.In other words EX3300-24P & EX3300-48P can be part of a single cluster. Regards, Rushi
View ArticleQFX5100 Stops passing IP traffic
Hello Posting here in a run up to open cases left and right. Last friday I had the following issue occur which we only resolved by taking the effected switch(s) out of the network. We are in the...
View ArticleVRRP Groups EX4300
Dear All I had an issue about a month ago with a EX4300 Virtual Chassis which Juniper Support helped resolve (2 thumbs up to Juniper Support to get the issue fixed). During the support call the...
View ArticleRe: VLANs to SRX Configuration
hi stuartce, - You can fix your DMZ connectivity by pointing your DMZ servers gateway to SRX dmz interface (10.88.50.254). - Dont think dmz L3 interface in EX is needed in this particular instance...
View ArticleRe: qsfp+ SR4 distances when splitted into 4x10GBaseSR ifs
Thanks Jonas.Juniper just came back to me and confirmed that distances reachable out of a 4x10GBAseSR coming from a splitted SR4 QSFP are much lower than distances reachable with native 10GBaseSR...
View ArticleRe: VRRP Groups EX4300
Hi Richard.Moth@ebiqui…, "will VRRP try and converge the VRRP groups at site A and site B into one large VRRP group?" Yes. " Is there a way to say which Virtual Chassis's are a part of the VRRP...
View ArticleRe: DHCP options 43
I have the hex string set up on my SRX in this fashion for a BlueSocket depoyment as well, but it doesn't seem to be working. The option 43 information is not appearing on the access point. I have an...
View ArticleBetreff: No Ethernet Switching - vSRX Firefly with Virtualbox
Hi, Thanks for your reply. Is there any alternative to firefly so that I can have full support? Actually I want to test for NETCONF and as Ethernet Switching is not running, I am not getting any...
View ArticleBetreff: No Ethernet Switching - vSRX Firefly with Virtualbox
The only other VM alternative is the vMX as there is no virtual EX as of yet. You can download a demo version of the vMX and there is a good getting started Day One book for this. But be aware that...
View ArticleBetreff: No Ethernet Switching - vSRX Firefly with Virtualbox
Hi, U can try vMX beta version. It support L2 functionilty same as EX9200. Thanks
View ArticleBetreff: No Ethernet Switching - vSRX Firefly with Virtualbox
to be clear, Juniper has two different layer 2 configuration setups, one released on the MX and the other used by the EX and SRX series devices. The EX9200 is the exception where this platform uses MX...
View ArticleRe: Lost SSHD daemon on virtual chassis ! help !
Thank you for the tip. This is exactly what happened to me and the fix worked. Thanks again.
View ArticleBetreff: No Ethernet Switching - vSRX Firefly with Virtualbox
Thanks. Will try vMX. But from the last few days, I have noticed having trouble with downloading any free juniper software."You have encountered this error because your account privileges do not permit...
View ArticleVirtual-chassis qfx5100 Switch Oversubscription
Hi All, During my studies about QFX-5100-48T virtual chassis I noted that there is a kind of lack in the documentation about the switch over-subscription's topic. The 2 sets of built-in interfaces on...
View ArticleRe: Virtual-chassis qfx5100 Switch Oversubscription
If you really have the need for a lot of east-west (probably server) traffic, then VCF (or some type of Fabric solution) is probably a better solution to consider. If the traffic is more north-south,...
View ArticleRe: Virtual-chassis qfx5100 Switch Oversubscription
Hallo, Thanks for answering to my question.If I got you correctly you are saying that the only topology able to ensure a 2:1 oversubscription is a full mesh with a maximum of 7 node in the VS. Is that...
View ArticleQ-in-Q to virtual router instance?
Hi together We have a customer with different sites which are connected through a QinQ network and all these sites need a local router/switch. Thus we use some Cisco switches to do the double tagging...
View Article