Re: mastership activities on 4200EX
For understanding log, apart from log mastership, you can take a look at the "show log messages". compare the timeline between show log messages and show log mastership. It helps you to clearly...
View ArticleLED problems after upgrade to Junos 18.1R3-S6 on EX3400
We have a stack of 7 EX3400s in a VC that were running 18.1R3 with no troubles for quite awhile. Last weekend I upgraded them to 18.1R3-S6 as per the JTAC recommended software version. Upgrade went...
View ArticleWhy no j-WEB available for JTAC recommended Version?
Hi,The JTAC recommended Junos version for EX4300's is 17.3R3-S4.2.Once installed if you try to run JWEB, it complains about a later version being available. Check download and install and off it goes...
View ArticleRe: Why no j-WEB available for JTAC recommended Version?
Dont worry, just notified of new version (Junos 18.1R3-S6) which does have a JWEB application to suit. Thanks
View ArticleClik here to view.
Re: LED problems after upgrade to Junos 18.1R3-S6 on EX3400
Hi Sycraft, Believe you are hitting a known cosmetic problem fixed on a newer Junos: https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR1428703 Hope this...
View ArticleRe: Why no j-WEB available for JTAC recommended Version?
Hi Peter,I don't see reports of any issue with the application package 17.3A1.I would say that try opening a case with JTAC for troubleshooting.
View ArticleHow many ASICs in EX-4300-P
Hi all Experiencing certain behaviour in ports 0-11 on 4300P, can I please ask how many ASICs in the 48port P version 1U device? Thank you
View ArticleRe: How many ASICs in EX-4300-P
Basically single PFE (Packet Forwarding Engine) ASIC (from Broadcom) but there would be other components like MAC PHY etc on group of ports basis. If you are having issues with 'just' ports 0-11 it is...
View Articlelicence
Hi there,Why does ex4300/ex4200 switch need a licence for routing functions? Musn't it be a permanent base licence that covers any routing protocol when purchase? How to fix this licence problem?bgp...
View ArticleRe: licence
Hi Arix, Two types of licenses are available on EX4300 switches: enhanced feature licenses (EFLs) and advanced feature licenses (AFLs).To use the following features on EX4300 switches, you must install...
View ArticleRe: licence
I am not sure but is it possible to grap one of the 3200EX or 4200ex swithes' key to install to another one. One licence -afl to multiple 4200ex in vc? if so, how to do this?
View ArticleRe: licence
As for EX switches used in a VC, only 2 license are need - one for Master RE member and one for Back-Up RE member.
View ArticleRe: licence
wrote:I am not sure but is it possible to grap one of the 3200EX or 4200ex swithes' key to install to another one. One licence -afl to multiple 4200ex in vc? if so, how to do this? EX license are...
View ArticleRe: LED problems after upgrade to Junos 18.1R3-S6 on EX3400
Are any of the JunOS 19 releases stable and recommended for use on the EX3400 platform?
View ArticleRe: LED problems after upgrade to Junos 18.1R3-S6 on EX3400
I'd suggest you wait for 18.1R3-S7 which will include this change. Just my 2 cents worth. There is actually no 19.x release out that has the change. You would need one of 19.1R1-S2, 19.1R2, or...
View ArticleRestoring from a config file
Hello, I used filezilla to copy the config of another switch. show | display set | display inheritance | save /var/tmp/config_backup.txt I now have the txt file. I've changed the switch name and the...
View ArticleRe: Restoring from a config file
copy the file to any folder such as /var/tmp enter config modedelete <<< this removes all current configrequest load set /var/tmp/myfilename.txt...
View ArticleClik here to view.
Re: Restoring from a config file
Hi jimbo55, @spuluka is right, you can copy the file to any folder and then load the config file saved in "set" format. Slight correction to the load command, it doesn't need a "request" preceding it...
View ArticleRe: Restoring from a config file
I just want to add a coupe of details to Steve Puluka's answer, It will be recommended to copy the file to /var/tmp then the next 2 steps are fine, enter to config mode (> edit)run "delete" to...
View Article