Re: new vlan not pulling IP from DHCP or able to ping Gateway
Do you perhaps need to configure vlan tag 128 on your wireless bridge hardware?
View ArticleRe: ae11 inactive - how to activate again
Hello, I did activate interface ae11 and hit commit, but still interface beloning to that has: inactive: ether-options { 802.3ad ae11;}unit 0 { family ethernet-switching { vlan { members 101; } }}
View ArticleRe: ae11 inactive - how to activate again
Hi, You can activate ether-options under the member interface, but any logical config should not be removed or deactivated. All logical config should be under the ae interface.activate interfaces...
View ArticleClik here to view.
Re: new vlan not pulling IP from DHCP or able to ping Gateway
You know, i didn't even think of that. I just looked at the bridges and they only have the 2 vlans in there. I'll add the others and report back.
View ArticleRe: tried everything - cannot communicate with the EX2200-C
The mini usb requires a driver that is not included with windows. The juniper page with the descriptions is here....
View ArticleRe: ae11 inactive - how to activate again
Thank You so much Ashvin, that fixed the interfaces config, now when I run sh interf descriptioon I see all ae0 ae1 ae3 besides ae11 which is not listed. Another question is there any down time? When...
View ArticleRe: Log message entries
I got this same error on my QFX stack. Can't figure it out either. m
View ArticleRe: Enabling Web Management
Was there ever a software version that had the web interface enabled for the QFX5100's?
View ArticleClik here to view.
Re: EX2200 Host 0 Boot from backup root
Alright Lets try another way to solve this problem .Lets try installing a new image using the CLI or J-Web. The newly installed image will become the primary image, and the device will boot from it on...
View ArticleCOS for CCTV Traffic on EX3300?
Hi all, I'm trying to COS CCTV traffic using url example http://www.juniper.net/documentation/en_US/junos12.3/topics/example/cos-ex-series-configuring.html but unfortunately not traffic hit video COS....
View ArticleGRE Tunnel Key on EX4300
Hi all, I want to move service from a Cisco switch to EX4300 switch, but I can't find the key option for configuring gre tunnel on EX4300. Is that option does not exist on EX4300, or is it hidden...
View ArticleRe: virtual chassis with high CPU consume
No, I configure the switch as an SNMP server, but not an SNMP client
View ArticleRe: virtual chassis with high CPU consume
Hi, I'm using a VC with 2 EX4500 and the CPU is very good. My Junos version is 11.4R5.7 In your case, please try something below:- Verify VC mode, if it's in mixed mode, try to change to non mixed...
View ArticleRe: virtual chassis with high CPU consume
Thank you for your adviceit's in non mixed mode
View ArticleRe: ae11 inactive - how to activate again
Hi, ae11 may not be having any descriptions. To add one:set interfaces ae11 descriptions "xxxx"I would assume a brief downtime when migrating ports to LAG, the time waiting for LACP negotiation to...
View ArticleRe: how to disable the virtual chassis mode on ex4200
Hi HAHA, Virtual chassis is enabled by default on EX4200, but it will not work until you plug in a VC cable and connect the switch to an other switch with VC supported. I dont know what is the reason...
View ArticleRe: ae11 inactive - how to activate again
make sure your AE device count is set to at least 12 as well https://www.juniper.net/documentation/en_US/junos14.1/topics/task/configuration/link-aggregation-cli.html
View ArticleRe: virtual chassis with high CPU consume
do you have any aggregated devices off of it? I had a similar issue that caused sfid and pfim to spik when a device off an agg port was failing lacp negotiation and arping out both interfaces, if you...
View ArticleQFX5100 request slice alternate
Dear Sir I have a qfx5100 at hand, and it seems i cannot do request slice alternate.when doing some googling, i came across this :Note: The slice option is not supported on the QFX5100 switch, because...
View Article