Re: EX3300 ACL dropping packets
Hello,I have a Host with some VMs. Each one of them has a Public IP. I need tomake sure that only these IPs are allow to pass traffic through this port.This ge-0/0/20 is an Ethernet Access Port not an...
View ArticleRe: EX3300 ACL dropping packets
Do your VM's get their IP addresses via DHCP? If yes than enabling DHCP Snooping along with IP Source Guard may solve your requirement....
View ArticleRe: EX3300 ACL dropping packets
No, Unfortunately the IPs are statically assigned. So unfortunately DHCP Snooping is not an option here
View ArticleRe: EX3300 ACL dropping packets
How about a MAC based filter or use mac-limit at the interface level? MAC-Limit, not MAC-Move-Limit, and for interface versus VLAN....
View ArticleRe: 4300 EX adding VSTP to existing RSTP
I think a more basic question is why are you using VSTP in the first place? I assume Edge is Cisco, and MDF now Juniper? Even then just get rid of VSTP on Cisco and make the dual links A/A FEC and...
View ArticleRe: 4300 EX adding VSTP to existing RSTP
I am using VSTP becasue AirFiber does not support RSTP, the UBIQUI reponse" Please disable STP in the airFiber. It will pass STP/RTSP BPDU transparently across the airFiber link. Also, if you have...
View ArticleRe: VXLAN/EVPN multihoming question:
Yes, Multi-homing to work properly, ESI sould be same on the interfaces that are connected towards CE.
View ArticleRe: VXLAN/EVPN multihoming question:
Hi !You are right regarding the pure multihoming.However what I looked into was the fact, that ESI-multihoming is a kind of aggregated ethernet- MC-LAG, so a close controlled connectivity.In this case...
View ArticleCant find device AE21
Experts, I have set up link aggregation AE21: aggregated-ether-options { lacp { active; periodic fast; }}unit 0 { family ethernet-switching { interface-mode trunk; vlan { members all; } }} added port...
View ArticleRe: Cant find device AE21
run show lacp interfaces does not show me that AE21 interface
View ArticleRe: Cant find device AE21
if sh int shows: ae0 up up ae1 up up ae2 up up ae3 up down ae4 up up ae8 up up ae11 up up ae12 up up ae13 up up ae14 up up ae15 up down ae17 up down ae18 up down ae19 up up ae20 up up ae21 probably...
View ArticleRe: Cant find device AE21
you should specify 22this gives you 22 ae interfaces starting from 0 up to 21 regards alexander
View ArticleRe: Cant find device AE21
Hi Folks,The below statement is a mandatory to configure the number of ae devices with LAG interface that you need to create. [edit]user@host# set chassis aggregated-devices ethernet device-count 22...
View ArticleRe: Cant find device AE21
my 4300's are on [14.1X53-D35.3] so 14.1 thank you all for help HAPPY NEW YEAR !!!!!!
View ArticleRe: Cant find device AE21
yes adding set chassis aggregated-devices ethernet device-count X in my case 22 showed ae21 and all even missing ae5 now I see all ae0 to ae21, I have to addmit I was sceptic before we upgraded from...
View Articleswitches software upgrade
Dear Experts, I have a few ex2200-c-12p-2g, few 3300, and few 4300 which is main MDF stack. ex2200: 12.3R12.4ex4300: 14.1X53-D35.3ex3300 12.3R12.4 Before I do anything I would like to find out the...
View ArticleAny one here have exprience integrate EX with Cobranet software?
Hi All, As per documentation regarding Cobranet discovery it just cun function using prior Layer 2 network. But in my design if Layer 3 with intervlan . So appreciate if someone here have share...
View ArticleRe: switches software upgrade
I would suggest you wait on both EX2200 and EX3300, especially since all is working well. What is driving people to upgrade legacy EX products, EX2200/3300/4200/45xx, is the fact that 12.3 release is...
View ArticleRe: switches software upgrade
This explanation rocks!!! Its valuable piece of information I needed. Thank You so much. I will wait till summer 2017 with all 2200,3300, and 4300 switches since the environment is a school, so summer...
View ArticleRe: Any one here have exprience integrate EX with Cobranet software?
Have not personally done Cobranet but looking over the documentation this all seems to indicate the Cobranet requires all the devices be in the same VLAN. But it does allow you to connect Cobranet...
View Article