Re: EX 9200 Feedback
Hi Colin, can you describe how you have your 9200's configured as your DC core whether it's in a VC/MC-LAG configuration, or which you would recommend if you had to do it all over again? I want to do...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
request system storage cleanup didn't find anything big to remove : admin@core> request system storage cleanup Please check the list of files to be deleted using the dry-run option. i.e. request...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
Hi Steve, since 14.1X53-D10, J-Web is no longer bundled with Junos and needs to be installed separately. Only a very primitive J-Web Platfrom comes installed by defauly. In order to get the full...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
*sigh* I have figured it out by pure fluke. The correct package that will intall j-web on the current JTAC reccomended release of JunOS 15.1R5.5 is actually jweb-ex-app-15.1A3-signed.tgz and not...
View ArticleRe: EX4200 OSPF not working properly
Ashvin, Think I am going to do the following on the two link ge-0/0/1 & ge-1/0/39 so they are the preferred route.Right now all traffic goes down the xe- set protocols osspf area 0.0.0.0 interface...
View ArticleClik here to view.
Re: EX4200 OSPF not working properly
Hello,starlog wrote: set protocols osspf area 0.0.0.0 interface ge-0/0/1 priority200set protocols osspf area 0.0.0.0 interface ge-1/0/39 priority 200 Leaving the xe- interface at the default 128...
View ArticleRe: EX4200 OSPF not working properly
Hi Folks,That is true; influencing metric is the right approach for this scenario.
View ArticleRe: Juniper switchport configuration
Hi Folks,EX-series switches support all three flavors of the Spanning Tree Protocol: 802.1D (STP); 802.1s (Rapid Spanning Tree Protocol, or RSTP); and 802.1w (Multiple Spanning Tree Protocol, or MSTP)....
View ArticleRe: EX4200 OSPF not working properly
Not sure where else I need to set the metric. admin@CORPSW01# ...0.0 interface xe-2/0/14 bandwidth-based-metrics bandwidth 10g metric 60 {master:3}[edit] admin@CORPSW01# ...0.0 interface ge-0/0/1...
View ArticleBetreff: QFX3500 shows Loading Junos... but the switch booted up and i can...
Yes, made no difference
View ArticleRe: EX4200 OSPF not working properly
Hi Folks,Please find the steps to increase the metric. In my setup the default traffic from r2 to r5 is via r3. I will increase the metric between r2-r3 to divert the traffic from r2 via r4 as below....
View ArticleBetreff: QFX3500 shows Loading Junos... but the switch booted up and i can...
Hi Folks,Please get these logs and it will give us some more clue on this observation.. show log inventoryshow log chassisdshow system boot-messages
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
Thanks for the info. Will look into getting this fixed.
View ArticleRe: Juniper switchport configuration
Just to add to Python's excellent message, Junos also has support for VSTP for interoperability with Cisco (or others) PVST+. If Cisco is running R-PVST+, then the Juniper side recommendation is to...
View ArticleInvalid LLDP frame issue on EX4200
Hi, I have a pair of EX4200 that is interconnected with a 4x1GE port LAG, today one of the switch start to complaining about LLDP remote database thrahing, upon investgation i saw the port keep...
View ArticleRe: File system full in Virtual-Chassis 4 EX2200
Hi Folks,Have you tried "request system storage cleanup" in the box? Since deleting the below files manually is not a good idea,-rw-r----- 1 root config 24117248 Jan 2 13:16 juniper.data-rw-r-----...
View ArticleRe: EX4200 OSPF not working properly
Python, No matter what metric I set it does not seem to route over the ge- interfaces. Still uses the 10g WAVE xe-2/0/14, any other ideas.? admin@CORPSW01# run traceroute 4.2.2.2 traceroute to 4.2.2.2...
View ArticleRe: EX4200 OSPF not working properly
Hi Folks,Please get "show route 4.2.2.2 extensive" from the box
View ArticleRe: EX4200 OSPF not working properly
Hi Folks,Please get the exact metric for the prefix and add sufficient metric in the xe-interface to overload the same in the path lab:r1> show route extensive 192.168.1.105 table inet.0 inet.0: 12...
View Article