Hello!
It's my first post, so I'm going to say Hello to everybody! Also I'm sorry in advanced if this is not the right place (Ethernet switching) to post this message.
First of all, this is my hardware setup:
SRX220 (JunOS 11.4R7.5) GE-0/0/1 (LAN) - this is the port from where I want to begin my L2 communication
SRX220 GE-1/0/0 (WAN - optic)
----- 192.168.253.34/30 -------
----- 192.168.253.33/30 -------
EX4200 (JunOS 12.2R5.3) GE-0/0/4 (optic)
EX4200 (ae0: GE-0/0/23 + GE-1/0/23 + RSTP)
----- VLAN.1000: 172.16.0.1/24 -----
----- VLAN.1000: 172.16.0.1/24 -----
EX2200 (JunOS 12.2R5.3) (ae0: GE-0/0/22 + GE-0/0/23 + RSTP)
EX2200 GE-0/0/4 - this is the port where I want to end my L2 communication.
The SRX JunOS dosen't have option of making WAN (GE-1/0/0 - optic) family ethertnet swhitching (port mode trunk). Is it possible without this option to make a L2 communication (VLAN) as I have described?
As an attachment all my configurations.
Thank you for your help in advance.