You're absoutely right. I didn't set up the VC ports, it was shipped to me this way. I was told that ports 0 and 1 were the VCC ports. I had no reason to believe that any other ports were set for VCC, but they were:
> ...-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Down 32000
vcp-1 Dedicated 2 Down 32000
0/0 Configured 5 Up 10000 1 vcp-255/0/0
0/1 Configured 5 Up 10000 1 vcp-255/0/1
0/33 Auto-Configured Absent
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
vcp-0 Dedicated 2 Down 32000
vcp-1 Dedicated 2 Down 32000
0/0 Configured 5 Up 10000 0 vcp-255/0/0
0/1 Configured 5 Up 10000 0 vcp-255/0/1
0/5 Auto-Configured Absent
I removed 5 and 33 using "request virtual-chassis vc-port delete" and the appropriate pic, member, and port numbers.
Thank you sir, much appreciated.