Re: What happen if i put no-split detection at more than two VC member?
Hello, You might face instabilities e.g. Interface or LACP flaps when member goes into line card mode. Regards, Rushi
View Articleshow interfaces irb.xxx
Hi all, Which statistics does interface irb show in "show interfaces irb.xxx extensive" ? What kind of packets does switch count? I don't use irb interface in my ex4600 for transit traffic, but traffic...
View ArticleRe: show interfaces irb.xxx
Hello, You can use this link to know more about IRB interfaces. http://www.juniper.net/techpubs/en_US/junos/topics/concept/bridging-routed-vlan-interface.html Regards, Rushi
View ArticleRe: show interfaces irb.xxx
Rushi, thank you for this link. I read this article. I don't use inter-vlan routing with my irb.100 interface.A traffic is only intra-vlan.But I see that input interface-counters (transit statistics)...
View ArticleRe: DHCP release / renew on EX
Yes - already tried that - however "request dhcp" only shows server as autocomplete - client is not possible on EX.This Article is also only for LN and SRX - not for EX RegardsChris
View ArticleRe: show interfaces irb.xxx
Hello Romas, Is this a standalone EX switch or part of any VC?Do you have any protocols like LACP configured on the switch?Moreover is this switch handling IPv4 multicast traffic? Regards, Rushi
View ArticleRe: show interfaces irb.xxx
Hi ! My guess is: ANY broadcast kind of traffic (like ARP, DHCP, Multicast,.... regards alexander
View ArticleRe: show interfaces irb.xxx
Yes, it is a virtual-chassis (4 ex4600) and I use LACP and AE-interfaces (14 ae-interfaces). I've made some tests. 1. I've added a counter on irb.100 interface show configuration firewall filter...
View ArticleRe: SFP validate failed? Trying to use a 10gig LR SFP+ in aggregated link
You're absoutely right. I didn't set up the VC ports, it was shipped to me this way. I was told that ports 0 and 1 were the VCC ports. I had no reason to believe that any other ports were set for VCC,...
View ArticleRe: EX4200 log on OS 15.1R5.5
These messages are for debug purposes and do not indicate any traffic impact. They will be hidden once again starting in 15.1R6.
View ArticleRe: Loadsharing portchannel between EX2300 and Nexus 9000
hello. I tried thoose the firtst one didnt let me tab it out. When i entered it manually i came as far as bellow. forwarding-options { storm-control-profiles 30M { all { bandwidth-level 30000; } } ##...
View ArticleRe: Loadsharing portchannel between EX2300 and Nexus 9000
Quick question - are you seeing same behavior from Nexus toward EX2300, that is only one link is carrying traffic? Or question might be are you only seeing this EX2300 toward Nexus, or in both...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Yes I stand corrected that for most EX [access layer] platforms, but not all, there is Limited Lifetime SW Support as well as Next Day Ship for Limited Lifetime HW Support. I was looking at an older...
View ArticleDHCP Relay on EX3400
How do you configure DHCP-Relay on the new EX3400 switches (version: 15.1X53-D55.5)? It used to be as simple as this: set forwarding-options helpers bootp server 10.100.134.10set forwarding-options...
View ArticleCan not configure Vlan on ex2200
Good afternoon.I am new to Juniper an JunOS.I have just deployed ex2200 switches to connect 8 buildings.The network is up and running (i can ping the router and access internet from all sites) BUT,...
View ArticleRe: DHCP Relay on EX3400
EX3400 is using ELS-style config. Example below: jh@fw# show forwarding-options dhcp-relay { server-group { dhcp-server { 1.2.3.4; } } active-server-group dhcp-server; group dhcp-server { interface...
View ArticleRe: DHCP Relay on EX3400
Thanks Jonas for the reply. Is this the minimal required configuration for a simple DHCP Helper? JTAC suggested this: set forwarding-options dhcp-relay forward-snooped-clients all-interfacesset...
View ArticleRe: Loadsharing portchannel between EX2300 and Nexus 9000
Hello. Nexus seem to loadbalance it quite nicely. I have 1 netround probe connected to the ex with 2 links acrive sening 1 Gbit stream each with different source and destination so nexus is...
View ArticleRe: DHCP Relay on EX3400
Yes, this is the minimum configuration as per this tech doc: https://www.juniper.net/documentation/en_US/junos/topics/example/dhcp-subscriber-access-dhcp-relay-minimum-configuration.html Agreed that...
View Article