I need your help. Attached are configuration files for the EX3300 and EX2300 switches.
I have setup a 20GB uplink from the EX3300 VC to the EX2300 switch using a link aggregation interface. The LACP on EX3300 is ae3 and on the EX2300 is ae0. Both interfaces are up and running and seems to be working.
On the EX3300 I have configured Vlan 30 (Guest_Network) and Vlan 1 (default) which is carried over the trunk ae3 interface to the EX2300 switch. Vlan 1 is setup as the native vlan. Vlan 1 and Vlan 30 are setup as RVIs on the EX3300. Vlan 1 subnet is 192.168.1.0/24 and Vlan 30 subnet is 192.168.30.0/24.
On the EX2300, I have configured Vlan 30 (Guest_Network). Vlan 1 (default) is aready setup by factory default; however it is not showing up in the configuration file attached. I have not setup RVIs for Vlan 1 or Vlan 30. Vlan30 and Vlan 1 is carried over the trunk ae0 interface to the EX3300 VC switch. On the EX2300 all the ports have Vlan 1 (default) assigned and the first 4 ports also have VLAN 30.
I have attached my laptop to port 9 on the EX2300 which is assigned Vlan 1 (default) and configured my Iaptop with the following network information:
IP = 192.168.1.160
SubNet = 255.255.255.0
Gateway = 192.168.1.2 (This is the IP address of the RVI for Vlan 1 on the EX3300 VC)
For some reason, I cannot ping any IP address on the 192.168.1.0/24 subnet. Also I am unable to connect to the Internet.
What am I doing wrong? Please help..