This is the short version of what I pulled from the switch with the show interfaces diagnostics optics. The top is the port that is working and has connectivity, the second is the port that will not link. I am new to this so any and all help or advice is appreciated!
Laser bias current : 5.394 mA
Laser output power : 0.2780 mW / -5.56 dBm
Module temperature : 36 degrees C / 96 degrees F
Module voltage : 3.3460 V
Receiver signal average optical power : 0.2264 mW / -6.45 dBm
Laser bias current : 5.984 mA
Laser output power : 0.2840 mW / -5.47 dBm
Module temperature : 43 degrees C / 109 degrees F
Module voltage : 3.3600 V
Receiver signal average optical power : 0.0004 mW / -33.98 dBm