Monitoring Vlan on multiple ports
Hi I want to monitor a single Vlan in EX 4300 switch sending the ouptut to multiple Ethernet ports. Can I do it?
View ArticleRe: no fiber connectivity
Hello CC18, What switch is it?Which version are you on?Do you see lights blinking on the transciever? You can run diagnostics for the interface and see if proper signal strength is maintained or not.
View ArticleSend Traceoptions to a remote syslog server
Hello Experts, I have a BGP traceoptions configuration. I want to send all the output of this traceoptions to a remote syslog server. Can you please guide me how to do that?user@EX4300> show...
View ArticleRe: Send Traceoptions to a remote syslog server
Hello, Can you refer to the link below? https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/destination-override-edit-system.html Specifically the command:- set...
View ArticleRe: Monitoring Vlan on multiple ports
Hello, You can refer the link below:- https://www.juniper.net/documentation/en_US/junos/topics/concept/port-mirroring-ex-series.html Regards, Rushi
View ArticleRe: no fiber connectivity
No lights on the transceiver.Model: ex2300-24pJunos: 15.1X53-D55.5JUNOS OS Kernel 32-bit [20161226.342161_builder_head]JUNOS OS libs [20161226.342161_builder_head]JUNOS OS runtime...
View ArticleMac limit
We used to have several EX4200's running Junos 12.3. We had those devices configured to limit the mac addresses to one for users and three for user+VoIP phone. We could issue the "show...
View ArticleRe: no fiber connectivity
Hi cc18, Since you tried replacing the fiber, optics etc and still the port is refusing to come up hints that the hardware itself might have gone bad. You can analyse the outputs for the below...
View ArticleRe: no fiber connectivity
This is the short version of what I pulled from the switch with the show interfaces diagnostics optics. The top is the port that is working and has connectivity, the second is the port that will not...
View ArticleRe: Mac limit
Have you looked here? https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/port-security-mac-limiting-cli-els.html This documentation covers newer EX with ELS style CLI. Also,...
View ArticleQinQ Again.
Does someone have a working QinQ for a EX2300 it does not seem to work no matter what I try. Have a case open and still no luck.This is what I have on 2 switches connected back to back on ge0/1/0...
View ArticleRe: no fiber connectivity
Could you take a snapshot of the complete output and attach it here?Meanwhile you can perform the loopback tests. Cheers!//Nex
View ArticleIGMP needed on PIM Interface towards source
Hi I have read and seen that when you enable pim sparse mode on an interface it is enabling IGMP automatically. I have an irb interface that faces only towards a source.I am seeing PIM state created on...
View ArticleRe: vQFX 18.1R1.9 PFE.
Hi snp. I just brought the vQFX PFE 18.1R1.9 image up in Vagrant today. I do confirm it is indeed RE and not PFE.Where we can report this? On Github https://github.com/Juniper/vqfx10k-vagrant or via...
View ArticleBandwidth policing on ex4200
Hi Guys,I have an EX4200 with an uplink to a customer.i would like to limit the customer incoming and outgoind traffic to 60M. the inbound working fine, configuration:Policer======set firewall policer...
View ArticleRe: Bandwidth policing on ex4200
Hello,AFAIK, traffic control profiles are not supported on EX4200https://www.juniper.net/documentation/en_US/junos/topics/concept/cos-qfx-series-traffic-control-profiles-understanding.htmlSupported...
View ArticleRe: no fiber connectivity
We did some testing yesterday, we was able to run a cat 6 cable a shorter route to stay under 300 ft and terminated it and linked it up to the switch. It looks like the fiber is bad to me since a...
View ArticleRe: Bandwidth policing on ex4200
so how i limited the inbound traffic?must be soulution for outbound traffic limit.
View ArticleRe: Bandwidth policing on ex4200
Hello, wrote:so how i limited the inbound traffic? You limited it with a policer, according to Your own config. wrote: must be soulution for outbound traffic...
View ArticlePull config to usb
I am having trouble pulling a config to a usb. I have followed instructions from different junpier forums but it will not let me unmount, does anyone have any info for this?
View Article