Re: DHCP Relay on EX3400
Hello Natesinz, This is a basic DHCP relay configuration on EX3400 root@jtac-QFX5100-48S-6Q-r030> show configuration forwarding-options dhcp-relayserver-group {serv1...
View ArticleRe: Loadsharing portchannel between EX2300 and Nexus 9000
How many actual streams are you testing with, just 2? If 2, I'd suggest trying like 10 and see what the results are. BTW, AE/LAG/PortChannel does not load-balance, they load-share. Generally with...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello, we have tested Junos 15.1R5.5 on EX2200 and EX3300 again and could narrow down the bug a bit. Authd doesn't work when it recieves an EAPOL Accept for a supplicant. If the switch itself is a...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Do you have a TAC case open? If yes, number please. Thanks.
View ArticleRe: Loadsharing portchannel between EX2300 and Nexus 9000
Hello, According to this link, beginning with EX4300, these options are available. http://www.juniper.net/techpubs/en_US/junos/topics/concept/interfaces-hashing-lag-ecmp-understanding.html Regards, Rushi
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello, Can you share output of the following command? show system core-dump Regards, Rushi
View ArticleRe: Snapshot On EX3400
You can see here some examples on how to use the recovery and non-recovery snapshots on EX3400/EX2300: http://nextheader.net/2017/02/23/snapshots-on-ex2300ex3400/=====If this worked for you please flag...
View ArticleEX9200 Stacking
Hello All, I want to know if we can stack or perfom virtual chassis between two EX9208 switch, or its on the roadmap. And if we can, then how can we do that ? Some documents say that we can do that via...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello, the output: "/var/tmp/authd.core-tarball.0.tgz""/var/tmp/authd.core-tarball.1.tgz"
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello, So there are authd cores.I think if you can open a JTAC case or else stay on lower version for now. Regards, Rushi
View ArticleRe: 802.1x broken in Junos 15.1R5.5
This is very likely to be due to PR1241326. This problem affects 15.1Rx and will be resolved starting in 15.1R6. Only EX2200 and EX3300 are affected. 12.3Rx is not affected. In 15.1Rx, the workaround...
View ArticleRe: EX9200 Stacking
VC with EX9200 has neither been recommended for use, nor 'officially' supported with any recent SW for last 2-3 years. Juniper made a decision at that time to stop using this feature. VC support is...
View ArticleRe: EX9200 Stacking
FYI I also sent a note to Juniper documentation team to fix all doc links for EX9200 and VC.
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Hello, Since 15.1R6 does not seem to be out, best thing would be to stay on working release.And if it is absolutely necessary, use the workaround provided in the PR mentioned by Akeskin Regards, Rushi
View ArticleGenerate Self-Signed Certificate on EX series
Hello guys, I want to generate new self-signed certifiactes on my EX2300-series switches. I found this...
View ArticleRe: Generate Self-Signed Certificate on EX series
Hello, Treat it as a friendly name of the certificate where you have to enter parameters like: DC - domain componentCN - common nameOU - Organization UnitO - OrganizationL - LocalityST - StateC -...
View ArticleRe: EX9200 Stacking
Thank you so much, and I think that the customer will go with the MC-LAG option. Hope that Juniper team can fix the documentations. Thanks again.
View ArticleIssue on QFX VCF with D40
Hi,I have a lot info on log like this: Mar 16 12:58:44 VCF-TEST : %PFE-3: fpc2 pfe_bme0_transmit: Received packet for member 4051Mar 16 12:58:45 VCF-TEST : %PFE-3: fpc2 pfe_bme0_transmit: Received...
View ArticleQFX3500 Configure Management Port but not me0
Hello, how could I configure a management port on the switch and connect via SSH not using me0. I want a normal ethernet-Port to be used for SSH. How could I achive that? Best regards,box
View ArticleRe: QFX3500 Configure Management Port but not me0
set system services sshset interfaces ge-0/0/47 unit 0 family inet address 10.0.0.1/24set interfaces ge-0/0/47 description "Management port"
View Article