Re: QFX5100 MC-LAG with QinQ
What is your MC-LAG core, a pair of QFX5100s? What SW version is being used? I assume the MC-LAG is configured active-actice, not active-backup/passive?
View ArticleRe: QFX5100 MC-LAG with QinQ
BTW, your initial posting said you had issue with Q-in-Q operation and that MC-LAG MAC learning was correct?? "we see that the MC-LAG part is working properly and that when looking at the ethernet...
View ArticleRe: DAC Breakout Cables for the EX4300 Switch
As stated previously not with EX4300 as the 40GE QSFP+ interfaces can not be channelized into lower speeds. Only option is to use 10GE interfaces from uplink module or some other switch.
View ArticleClik here to view.
Private VLAN
Hi all, I have a topology shown belowTwo switches run VLAN with two primary VLAN 100 and 200. Two primary VLAN 100 and 200 also have secondary VLAN community VLAN 40. The interface connects between two...
View ArticleClik here to view.
Set Switch as a DHCP server, using DHCP relay. Which takes precedence over...
Hi folk, Between configuring a switch as a DHCP server and deploying simultaneous DHCP reply. Which configuration takes precedence over the other? Topology:[Client PC] --- ge-0/0/0 [EX Switch] ge0/0/1...
View ArticleDuplicate Frames IRB
Noticed that even after a factory reset to defaults, the switch will will duplicate broadcast frames if the default vlan is attached to a L3 IRB interface. When two switches are connected, end hosts...
View ArticlevQFX MC-LAG ICCP issue
Hello,I'm trying to setup vQFX nodes to run MC-LAG. Unfortunetlly without any success. I can't ping over ICP-PL link and can't see any MAC entries or ARP. Model: vqfx-10000Junos: 15.1X53-D63.9 set...
View ArticleRe: Duplicate Frames IRB
Have you opened a case with Juniper TAC? I assume what is happening is that frame is being forwarded as any broadcast (or multicast) would, and is also being sent (copied) to RE, who then forwards it...
View ArticleRe: vQFX MC-LAG ICCP issue
The only suggestion I have are: 1 - add an ARP/MAC mapping for each IRB. Some thing like setinterfaces irb unit 50 family inet arp 10.244.6.41 l2-interface ae0.0 mac e8:b6:c2:7f:37:e3; (ARP/MAC is...
View ArticleRe: vQFX MC-LAG ICCP issue
I will try to add a static ARP entry.I tried with MC-AE interface - no success. all intefaces are up, but can't see any arp entries for IRB interfaces. For test, I have created single xe-0/0/0 iL3...
View ArticleRe: vQFX on VMware Fusion - RE won't boot
Download Vagrant D63 package and extract "packer-virtualbox-ovf-1491593710-disk001.vmdk". Enjoy D63 RE.
View ArticleRe: Private VLAN
NO. You are missing the community vlan among other statements. You configure one Primary vlan and the primary vlan must be set to be primary for the community vlans. This article...
View ArticleRe: Private VLAN
Hi lyndidon, I gave the idea and didn't show full configuration. So, If I configured more command line as you said, Will PCs which are same community vlan and match primary vlan ping successfully? Thanks
View Articledownload vqfx10k-re-1x53-d60.vmdk
Hello, How can i download image vqfx10k-re-1x53-d60.vmdk trial for gns3?its for study porpuse. Thanks
View ArticleRe: download vqfx10k-re-1x53-d60.vmdk
You can request demo or evaluation copies for the vQFX here. https://www.juniper.net/us/en/dm/free-vqfx-trial/
View ArticleRe: download vqfx10k-re-1x53-d60.vmdk
Hi Spulika, I already tried to download from link that you provide. i get "You have encountered this error because your account privileges do not permit access to the information or service requested."
View ArticleRe: Private VLAN
Yes. Once properly configured, all the devices in the separate community vlans will be able to communicate with each other.
View ArticleRe: download vqfx10k-re-1x53-d60.vmdk
Just call Juniper TAC at 1-888-314-5822 and have them open a Admin (non-technical) case to get you access to this code.
View ArticleQFX10002-36Q as internet router
Anyone using the QFX10002-36Q as an internet router? Looking at using it in a site with about +3M routes in the RIB and about 650K in the FIB.I know there are some new licneses required to unlock those...
View ArticleRe: download vqfx10k-re-1x53-d60.vmdk
"You have encountered this error because your account privileges do not permit access to the information or service requested." Right on the same page with this text are two very small links. You can...
View Article