Re: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
I know there is someone out there that can help me....
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
Well, I was finally able to resolve my issue with the configuration on the EX2300-C switch. For the trunk interfaces / ports including the link aggregation (ae0) on the EX2300 switch, I had to add the...
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
Glad you have it working now. I'm sure the process was frustrating. You have two options to add vlans to trunk ports, your method is above is one under members of the interface. The second option is...
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
spuluka wrote:Glad you have it working now. I'm sure the process was frustrating. You have two options to add vlans to trunk ports, your method is above is one under members of the interface. The...
View ArticleEX2300-C 12P - Temperature is extremely hot on this unit. What is a safe...
I have the EX2300-C 12P unit runing JUNOS image 15.1X53-D56. The two 10G ports are being used as an uplink to my EX3300 switch. The management port is being used as well as the first 3 ports on the...
View ArticleRe: EX2300-C 12P - Temperature is extremely hot on this unit. What is a safe...
Appears to be between 42-62. root@ex2300c > show chassis temperature-thresholds Fan speed Yellow alarm Red alarm Fire Shutdown (degrees C) (degrees C) (degrees C) (degrees C) Item Normal High Normal...
View ArticleRe: Remove interface from range
I cannot get the CLI to accept those commands. I'm not sure what I'm doing wrong.
View ArticleRe: Remove interface from range
This the message when I attempt to delete the interface range: {master:0}[edit]obtech@SAND-IDF-Faculty# ...ange ge-4/0/36 to ge-4/0/47warning: statement not found Command I'm typing is delete...
View ArticleRe: Remove interface from range
This is the error when I try and commit the following commands: set interface-range wireless-ap-ports member-range ge-4/0/37 to ge-4/0/47set interfaces ge-4/0/36.0 family ethernet-switching port-mode...
View ArticleRe: How To Find MAC Address of device attached to switchport
How about the device IP address? I know the device mac, connected to juniper port 0/0/1. How do i know the IP address of the device? (which is static)
View ArticleRe: How To Find MAC Address of device attached to switchport
Akazi2017 wrote:How about the device IP address? I know the device mac, connected to juniper port 0/0/1. How do i know the IP address of the device? (which is static) You could probably use a protocol...
View ArticleRe: Remove interface from range
>show configuration interfaces so we can see all the configuration on the interfaces. The advice given means you have to delete the interface range and create a new one, then configure the ge-0/0/36...
View ArticleRe: EX-2300 15.1X53-D56 DHCP snooping untrust on trunk
Optionstrusted—The interface specified in this group is trusted. DHCP snooping and DHCPv6 snooping do not apply to the trusted interface. Likewise, DAI, IP source guard, IPv6 source guard, and IPv6...
View ArticleRe: Strange log messages in EX2300
Here's my syslog configuration for this device: syslog { user * { any emergency; } host xx.xx.xx.xx { any any; source-address xx.xx.xx.xx; } file messages { any notice; authorization info; } file...
View ArticleRe: Remove interface from range
I get as far as the "set interfaces interface-range wireless-ap-ports port-mode trunk unit 0 family ethernet-switching port-mode trunk vlan members CSMSBYOD" but it will accept the port-mode parameter....
View ArticleRe: Remove interface from range
Sorry...I meant to say it WILL NOT accept the port-mode trunk parameter
View ArticleRe: Remove interface from range
These were the commands that worked: set interfaces interface-range wireless-ap-ports unit 0 family ethernet-switching port-mode trunk vlan members CSMSBYODset interfaces interface-range...
View ArticleRe: Strange log messages in EX2300
There does not seem to be enough information here for me to tie this to a particular port. But there are errors for both logical (ifl) and physical (ifd) in the logs. I'm not sure how to interpret...
View ArticleEX2300-C can't load 'kernel'
*****can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help.loader> *****My EX's are in this state and none of the online recovery methods are working. I can get to...
View ArticleRe: EX2300-C can't load 'kernel'
Can you send the failure output? Honestly it sounds like bad hardware.
View Article