Re: EX2300-C can't load 'kernel'
*****loader> install --format tftp://192.168.6.53/junos-arm-32-15.1X53-D56.tgzETH LINK UP: 1000FDcannot load kernel from package (error 2)loader>*****using tftp. with u-boot prompt, i can get...
View ArticleRe: EX2300-C can't load 'kernel'
I recently had to try the following, and was able to get past. https://kb.juniper.net/InfoCenter/index?page=content&id=KB20643https://kb.juniper.net/InfoCenter/index?page=content&id=KB29113
View ArticleRe: EX2300-C can't load 'kernel'
Can you send the output of your tftp upgrade attempt? This is procedure: https://kb.juniper.net/InfoCenter/index?page=content&id=KB20643
View ArticleRe: EX2300-C 12P - Temperature is extremely hot on this unit. What is a safe...
That is funny they have the word FAN in the report. Still that is excessive heat .
View ArticleRe: EX2300-C can't load 'kernel'
loader> set ipaddr=192.168.6.150loader> set netmask=255.255.255.0loader> set serverip=192.168.6.53loader> install --format tftp://192.168.6.53/junos-arm-32-15.1X53-D56.tgzETH LINK UP:...
View ArticleRe: EX2300-C can't load 'kernel'
can't get to single user mode either =\ loader> boot -scan't load 'kernel'no bootable kernelloader>
View ArticleClik here to view.
Re: EX2300-C can't load 'kernel'
at the u-boot prompt, i can get the device to pull down an image from tftp server:*****=> tftpboot junos-arm-32-15.1X53-D56.tgzETH LINK UP: 1000FDUsing bcmiproc_eth-0 deviceTFTP from server...
View ArticleRe: EX2300-C can't load 'kernel'
can't get to single user mode either =\ This is known issue (I believe) with all newer ELS based EX switches outside of EX9200.
View ArticleRe: EX2300-C can't load 'kernel'
This is known issue (I believe) with all newer ELS based EX switches outside of EX9200. So the only resolution is RMA?
View ArticleRe: EX2300-C can't load 'kernel'
single-user mode is different on EX3400 and EX2300; please see following KB: https://kb.juniper.net/InfoCenter/index?page=content&id=KB31403&actp=METADATA aren't you able to boot from the OAM...
View ArticleRe: How To Find MAC Address of device attached to switchport
The command show arp will also display the ip address. But the switch needs ot have a layer 3 interface in that vlan for those to be present. If the gateway is on an SRX then show arp there will...
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
Interesting, checking my switches I see is under unit instead of the physical interface.
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
spuluka wrote:Interesting, checking my switches I see is under unit instead of the physical interface.Not sure I understand your comment. Can you show me what you are talking about..
View ArticleRe: EX-4600
Hi,I think the answer is on this doc. Services Feature Guide for EX4600 Switcheshttps://www.juniper.net/documentation/en_US/junos/topics/concept/dhcp-bootp-qfx-series.html Regards,TP
View ArticleRe: Uplink from EX3300 VC to EX2300-C not passing traffic for Default Vlan (1)
Sorry for the confustion. The kb article has this. ae0 { description "A LAG Uplink to EX3300 Virtual Chassis Switch"; native-vlan-id 1; aggregated-ether-options {...
View ArticleRe: Strange log messages in EX2300
Unfortunately, I didn't find interface with index 28, and interface 28 itself (if this error maybe mean physical interface) has zero counters and I believe from moment of first start there was nothing...
View ArticleRe: Q-in-Q in QFX-5100
Hi Abdul, Please find the sample config below. Find the Topology used in the attachment. On CE devices:root# show vlans >>>> Customer VLANCVLAN {...
View ArticleRe: Q-in-Q QFX 5100
Hi Abdul, On CE devices:root# show vlans >>>> Customer VLANCVLAN { vlan-id 100;} root# show interfaces ge-0/0/7...
View ArticleRe: ex4300 vs ex4200 reachability through bridge
Sorry for the delayed reply. I tried with multiple versions so versioning isn't an issue. It's the way the irb interface handles that connection when it is the gateway apparently. Ultimately I ended...
View Article