Re: Pull config to usb
Are these the usb drive mount instructions you are using? https://kb.juniper.net/InfoCenter/index?page=content&id=KB12880 What message to you get after the final unmount command is run?
View ArticleRe: QinQ Again.
Strangely enough the above config started working. I did remove the interfaces from the rstp. For some reason it must be an arp issue. Pings and traffic flow between switches now. The above config...
View ArticleRe: Bandwidth policing on ex4200
Following command is enough for outgoing shaping set class-of-service interfaces ge-0/0/1 shaping-rate 60m
View ArticleRe: Bandwidth policing on ex4200
Hi,thats what i configured and still it doesent work. any other idea?
View Articlebcm_l2_replace fail
Hello, Every few seconds the syslog reports the following:Is this a cause for concern? Please advice, thanks! May 28 12:39:34 VirtualChassis vc: rpd[4358]: task_get_socket: domain AF_UNIX type...
View ArticleRe: bcm_l2_replace fail
Looks like you might be hitting PR938284 https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR938284 If you want to clear you can upgrade to a resolved release:Resolved In14.1R3 14.2R1...
View ArticleRe: Bandwidth policing on ex4200
Verify if shaping is applied by running: show class-of-service interface <int>Generate excessive traffic and check show interfaces <int> statistics Should show that shaping is indeed...
View Articleex4200-48px jweb help
Im new to the junos systems but when i log on to jweb to manage the switch i get a message sayaing to update to jweb 15.1a3.I clicked the update button and nothing happens so i just go around it and...
View ArticleRe: Send Traceoptions to a remote syslog server
Hello Rushi, 'set system tracing destination-override syslog host x.x.x.x': Will this command cause the device to stop the trace output to the local file in the device and just send the trace to ONLY...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
I have the same problem with a very similar df output. Any other ideas? I just upgraded to 15.1. root@SUBMARINE-CRN-SWITCH:RE:0% df -h Filesystem Size Used Avail Capacity Mounted on /dev/da0s2a 184M...
View ArticleFirmware version required for Installing EX9200-6QS line card in existing...
Hello there, I have been doing some research based on our current requirement.We need to install a 40G line card on the existing EX 9200 core switch. Below are my findings: According to the Juniper...
View ArticleRe: Firmware version required for Installing EX9200-6QS line card in existing...
Support for 14.2 ended two weeks ago (https://www.juniper.net/support/eol/junos.html) so if this equipment is critical I would upgrade after a confg review against known issues and behavior changes in...
View ArticleRe: vQFX 18.1R1.9 PFE.
Hi snp and J-NET members. I informed my Juniper SE about issue (PFE image being RE image in reality) and asked him where to report issue. He asked internally. Let's see if there will be some answer....
View ArticleNeutron OVS plugin Pike or Queens
Is the Neutron OVS plugin compatible for Pike or Queens release of openstack. Is there goign to be development for this?
View ArticleEX2200 Switch reset password for virtual chassis system.
Hello, I am trying to get into a 4 switch virtual chassis system that I've taken over that had no documentation. I'm not totally familar with Juniper switches so I'm likely missing something. I've...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
OK I see now. To download the correct J-web app (jweb-ex-app-15.1A3-signed.tgz), it is on a different page.1. Go to https://www.juniper.net/support/downloads/?p=jweb2. Select ver 15.1.3. Download...
View ArticleRe: EX4200 running 15.1R5.5 unable to install J-web due to low free space
One more thing, I did not need a support contract to download J-web. However I did need to request access via JTAC by raising a Admin Service Request (License) request.
View ArticleRe: EX2200 Switch reset password for virtual chassis system.
It would require a restart to reset the password. First save the configuration to a remote system. Then schedule some downtime. Log into the the master RE at the CONSOLE! and reboot (request system...
View ArticleRe: Send Traceoptions to a remote syslog server
You can get some more information from this article:https://www.juniper.net/documentation/en_US/junos/topics/concept/junos-software-tracing-logging-operations-overview.html
View Article