Re: EX2200 Switch reset password for virtual chassis system.
wrote:It would require a restart to reset the password. First save the configuration to a remote system. Then schedule some downtime. Log into the the master RE at the CONSOLE! and reboot (request...
View ArticleMC-LAG on Both QFX10002 and QFX5110
Hi experts. I want your help in configuring MC-LAG on both layers i.e for QFX5110 and QFX10002. Please put me wise will this design work without any issue? I am using virtual environment on server side...
View ArticleRe: MC-LAG on Both QFX10002 and QFX5110
Go to this link: https://www.juniper.net/documentation/en_US/junos/topics/example/multichassis-link-aggregation-qfx-series.html and download the guide located at upper right hand side, and follow the...
View ArticleRe: MC-LAG on Both QFX10002 and QFX5110
Thanks for the quick responce. I'll check it tomorrow and let you know.
View ArticleEX4200 VC port options are only 0-23 on a 48 port switch
We have a EX4200 that is connected to a 2200-c and it was never put into VC. Before someone says something about "best practices" these two are on separate floors and will never saturate a 1GB link...
View ArticleRe: EX4200 VC port options are only 0-23 on a 48 port switch
QFX5200, EX3400, EX3300, EX2300, and EX2200 switches cannot be part of any mixed Virtual Chassis. taken from documentation...
View ArticleSNMP 1 GB interface
Hello all, Am able to poll TX and RX laser power of a 10 Gb interface from my MX with OID 1.3.6.1.4.1.2636.3.60.1.1.1.1.5.775 and 1.3.6.1.4.1.2636.3.60.1.1.1.1.7.775.I would like to poll the laser...
View ArticleRe: SNMP 1 GB interface
Should work with same OIDs . I just checked these OIDs and see laser power for input and output
View ArticleRe: Bandwidth policing on ex4200
Hi, i dont know why but now the: show class-of-service interface <int>command is working!!! thats what i configured fron the beggining, the is any time that we need to wait before the command...
View ArticleBreaking apart a EX4600 and EX4300 mixed mode chassis
Hello everyone, I'm looking to replace my EX4300 with another EX4600 in my mixed mode virtual chassis right now. I'm having a bit of dicciculty finding how to do this properly so I was hoping one of...
View ArticleRe: EX4200 VC port options are only 0-23 on a 48 port switch
Well that halts that project. Thanks for that link! Also about thre sfp! That was going to be the next test. Still though, why can the ex4200 only use ports 0-23? I guess it really doesn't matter...
View ArticleRe: Breaking apart a EX4600 and EX4300 mixed mode chassis
Hi, Make sure your new member has following things ready :- same JUNOS version of existing VC- make sure you configured mixed mode on new member as well.>request virtual-chassis mode mixed - After...
View ArticleRe: Breaking apart a EX4600 and EX4300 mixed mode chassis
Hi, Here is the link for the same:https://www.juniper.net/documentation/en_US/junos/topics/task/installation/virtual-chassis-ex4200-member-replacing-cli.html Hope this helps.Regards,Ajo Thomas
View ArticleRe: SNMP 1 GB interface
Hi Akushner,I tried the same OID and changed the SNMP ifIndex accordingly but did not get any results.I noticed that the command works for only xe-x/x/x interfaces but not for ge-x/x/x ones.Is there...
View ArticleLAG port goes BLK DIS state after adding to VSTP
Hi, I have a VSTP running between a virtual chassis (2 x QFX5110) and Cisco VSS (2 x Catalyst 6509E), the Root Bridge is on the Juniper VC and the LAG between them works just fine.I wanted to add...
View ArticleClik here to view.
Re: LAG port goes BLK DIS state after adding to VSTP
This is the topology, I want to move LAG between VSS and this ToR switch to LAG between VC and ToR. Basically Po1<>Po315 connection must be moved to Po1<>ae14
View ArticleRe: EX3400 - Recovery from failed SW upgrade fails
Thank you very muchit worked perfect for me
View ArticleRe: LAG port goes BLK DIS state after adding to VSTP
Port role disabled simply means the interface is down. The fact that ae14 stays in that state after enabling means ae14 is not actually up, otherwise if blocked it would still be assigned some active...
View ArticleOID for SNMP monitoring line cards in EX9204
Hello, I need to add the line cards of EX9200 switch for snmp monitoring. Can anyone please tell me what is the proper OID to monitor? user@switch> show chassis hardware | grep EX9200 Routing Engine...
View ArticleRe: OID for SNMP monitoring line cards in EX9204
jnxFruState : Is this the right one to monitor?
View Article