Re: Qfx-3500
Hi, I have the same problem on a QFX3500 stuck in _linecard_ mode. Right now, I can't find any solution in the previous messages, or even on Google. Amnesiac (ttyd0) login: root Logging to...
View ArticleRe: Qfx-3500
I have two problems: 1) In /config, I cannot delete or zeroize the file "usage.db". Is it a file related to virtual chassis? 2){linecard:0}root> request virtual-chassis reactivateerror: abnormal...
View ArticleRe: EX4500 rebooted automatically without proper reason
I believe (not 100% sure) that the redundant power supply design should load-share when both are installed and active, this is why upon a failure of one, the other just supplies more 5/12 V power. In...
View ArticleEX2300/EX3400/EX4300 - sFlow v5 or other version?
Hi, is sFlow implemented in EX2300/EX3400/EX4300 v5 or not? I can not find this info anywhere (it is written in datasheets for EX4600 for example and QFX5k switches)
View ArticleRe: EX2300/EX3400/EX4300 - sFlow v5 or other version?
The feature explorer tools is the best place to confirm which platforms and Junos versions are needed for particular functions. Here is the sflow page....
View ArticleRe: Stack with different revision members - EX4200-48T
Compatibility for virtual chassis is based only on the major model number of the switch the minor revision numbers do not matter. You will need all the ex devices to be on the same version of Junos.
View ArticleSuccessor to EX3300 - EX3400 Questions
I wanted to reach out and quickly pick the collective brain of the community. We plan on putting together a learning center on our school campus comprised of trailers while our permanent Middle School...
View ArticleRe: Successor to EX3300 - EX3400 Questions
We have a some stacks of 3400. seem ok.CLI is faster than 3300 but not as fast as ex4300, if you can afford it , try the ex4300 ( 4x10 is additonal module/cost) but way faster piece of kit.We are on...
View ArticleRe: Successor to EX3300 - EX3400 Questions
#1, I would think whomever (Juniper Partner) you would be purchasing these switches through (maybe the same people you purchased your EX3300 from?) would be able to answer all of your questions, quite...
View ArticleRe: Successor to EX3300 - EX3400 Questions
rccpgm,,,,Believe me, it would be much harder to get the comprehensive and acurate information you so kindly provided me here from our reseller.... So thank you very much for this!!
View ArticleClik here to view.
Re: EX2300/EX3400/EX4300 - sFlow v5 or other version?
Sure, but there is no information regarding sFlow version at feature explorerThat is why I checked datasheets and there is no information available for EX2k/3k/4k (except EX46xx) So my question still...
View ArticleRe: EX2300/EX3400/EX4300 - sFlow v5 or other version?
sFlow is correctly documented in the feature explorer: https://apps.juniper.net/feature-explorer/feature-info.html?fKey=1314&fn=sFlow%20technologyIt is also mentioned correctly in the release notes...
View ArticleRe: Successor to EX3300 - EX3400 Questions
"EX4300 has more 40GE interfaces (6 vs 4) than EX3400"Actually it is 4 (T models) vs 2 "the new models are L2 only in Base"Actually IPv4 RIP is included in base license, so EX3400 is "L3 Lite" rather...
View ArticleRe: Successor to EX3300 - EX3400 Questions
MM-Zel...... Thanks...yes, I did notice that in the datasheet -- that RIP and Static routing is in the base. We still need the PIM so...Again,,,thanks for clarifying...
View ArticleRe: EX2300/EX3400/EX4300 - sFlow v5 or other version?
TY for help and your time. Yes, all clear (from the start) - sFlow is implemented in EX2k/3k/4k.However still not sure if it is v5 that is implemented or v4 on these swithches? PS Some other brands...
View ArticleRe: EX2300/EX3400/EX4300 - sFlow v5 or other version?
You are right. This is missing both in the documentation and cli output.I expanded my test a bit and it's version 5 it's sending: [root@space-XXXX ~]# tcpdump -vvvvvni eth0 port 6343 tcpdump: listening...
View ArticleRe: Corrupt alternate partition
Okay, this was weird. I read elsewhere that if you go into the shell and unmount the alternate partition, it would fix the problem. I tried to do that but I didn't have the root password so I couldn't...
View ArticleQFX5120 interface designations
Hi All, Anyone happen to have one of these? Ours are still a couple of weeks away and planning the cabling job now, but have suddenly wondered what the 10/25g ports and 40/100g port designations would...
View Article