Procedure to add a new member to a Juniper stack.
Adding a new member to a Juniper stack. Upgrade/Downgrade the Junos SW Version to match the stack you’re adding to. Obtain the Serial Number of the new chassis being installed.CLI:...
View ArticleRe: EX3300 - out-of-band interface - not working
Hello guys, finally I moved somewhere, I have started with rollback 0 then I put following commands --> root@xxx# delete interfaces vme root@xxx# set interfaces me0 unit 0 family inet address...
View ArticleClik here to view.
Re: EX3300 - out-of-band interface - not working
Hi guys, we made it I used -->delete vlans PC l3-interface vlan.0 commit confirmed 10and now it`s working perfectly, both SSH and HTTPS on 192.168.221.26, thank you for your effort to get through...
View ArticleEVPN with VXLAN on qfx5100, now NSX hypervisors
Hi I have setup an IP fabric with EVPN control plane using VXLAN in the data plane. I have multiple DC's and so far this is working well. All of my end devices are bare metal or vlan based hypervisors...
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Did this ever get resolved. I am having a similar problem with brocade switches not seeing each other when using a per-VLAN STP. It works fine with a single instance of STP. My understanding is that...
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
are you using EX4300, can you please post your config ?
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Yes EX4300 VC, connected to a VPLS using MX. LLDP works fine. {master:0}[edit]admin@lab_member0# show protocols layer2-control mac-rewrite interface ge-0/0/12 { protocol { stp; lldp; vstp; }}interface...
View ArticleRe: EX4300 QinQ Compatibility with cisco 3750
Can you please post your topology, I see no reason why this is not working ?
View Articleqfx5100 VC multicast traffic BW allocation
Hi community, we have a VC built-up by x4 Juniper 5100. Mos of the traffic crossing this platform is video mcast traffic and we suspect of mcast traffic lost. Client servers are connected via 10G ports...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
This will not fullfil my needs. When I study something new for the first time, I always look for the use cases. Now, draft-kompella is here, and people say that it eases the configuration of p2p L2VPN...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Hi, The auto-discovery is to discover the remote PE.With Martini, the remote site has to be specified using neighbor x.x.x.x. This is not required in BGP L2VPN / VPLS. For the sites to be unique, a...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Hi, An update to the previous discussions.Both solutions provided are working and valid configurations.Below is sample config for 2 PEs:PE1: root@PE1# show interfaces ge-0/0/5...
View ArticleRe: QFX5100 Junos 15.1 xSTP and ELS-style trunk interfaces
Hello, As far as I know, a commit check has been introduced since 15.1 which will prevents enabling STP on ELS style configured physical interfaces. Regards, Rushi
View ArticleRe: qfx5100 VC multicast traffic BW allocation
Hi i've tried creating a new scheduler with new transmit and shaping rate percent values as well as priorty so mcast is kind of priorized on the egress interface. i fiind no way to macth this...
View ArticleEVPNoVXLAN on qfx5100 with vmware
I have an ip fabric running on qfx5100 using EVPN with vxlan. So far so good. I cant find any documentation regarding integrating this with vmware without NSX. Every example is based on NSX.Main...
View ArticleRe: QFX really weird OPTIC issue
With the bad optic in a bad port it just acted just as if there was no optic in the slot. I tried formatting and starting from scratch. Still same issue. I ended up RMA'ing the boxes. New boxes work...
View ArticleRe: EVPNoVXLAN on qfx5100 with vmware
I've not used vxlan yet, but from what I have seen in the technical presentations you currently have two basic means to tie this into your VMware infrastructure: vCNS - vClould Network and SecurityNSX...
View ArticleRe: QFX really weird OPTIC issue
Thanks for the update. This does seem pretty extreme that a bad optic can kill the port hardware. Do you have access to support from the optic vendor to see what the root cause may be?
View ArticleRe: qfx5100 VC multicast traffic BW allocation
Hi, Could you possibly try creating a scheduler-map and then apply the scheduler-map to the interface:set class-of-service scheduler-maps xxxxx forwarding-class mcast scheduler yyyyy set...
View ArticleEX 4200 Line card "not present" state
Hi I am facing one issue in EX 4200 stack of 3 switches. One is master other is backup and lastone is line card. Presently Line card showing "not present" when issue show virtual-chassis command....
View Article