Re: ELS and QinQ and Layer 2 Protocol Tunneling
Hi,thanks for sharing. I would appreciate any new information about this problem. Thx
View ArticleStacking EX2300 Switches with 10 gb DAC
I haven't been able to find exactly what I'm looking for on this topic, probably because I'm not usually the right terminology. Can someone give me the process or a link for setting up an EX2300-48P...
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
What is your case number please? Thanks.
View ArticleRe: EX - Zero Touch using USB, how?
This kb method says for SRX but we have also used this same method on ACX series. It may also work on the EX. Basically you create a fat32 USB with the autoinstall instructions and the version of...
View ArticleRe: Finding incomplete ARP entries
The underlying OS for Junos is BSD if that helps and you can exist the the shell to see what is visible there. In Junos your other path for mac information is the ethernet switching commands show...
View ArticleRe: Stacking EX2300 Switches with 10 gb DAC
You will use the uplink port method for the VCP ports on the ex2300 series on the bottom of page 47 and following: Setting an Uplink Port on an EX Series Switch as a Virtual Chassis Port...
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
Ticket number is 2017-0111-0435. I have had a little progress with TAC on this. They have labbed it up and have it working, kinda of. At this point it does work, until I add a interveneing switch...
View ArticleRe: EX - Zero Touch using USB, how?
Steve, I will try that on a new EX2300 tomorrow,. Thanks
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
" does work, until I add a interveneing switch with trunk ports in the middle" - why does the intermediate switch need to have trunk ports? Don't you just want the frames/packets to pass throught the...
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
Looks like maybe you solved this - just wondering what you did with the interveining [middle] switch/device to get everything to work? Thanks
View ArticleConfig Archival - change Filename
Hi all, is it possible somehow to change the archival filename from standard notation <switch-name>_YYYYMMDD_HHMMSS_juniper.conf.n.gz to lets say...
View ArticleRe: ELS and QinQ and Layer 2 Protocol Tunneling
I it was an EX2200. It doesn't have a dot1q license, but I enabled dot1q on the VLAN for some reason and it worked. I get a license error on the switch, but it is now working. I still need to run...
View ArticleDHCP bootp helper not forwarding on EX2200
Hi, We have an EX2200 which we are configuring to be compatible with a PXE boot system. We've got it working on our Brocade switches but Juniper is proving more difficult. "show helper statistics"...
View ArticleRe: EX - Zero Touch using USB, how?
Steve, that will not work for what I need, thanks for the help.! Tom
View ArticleRe: DHCP bootp helper not forwarding on EX2200
It does seem like it should work with this config, though the RVI numbering threw me for a second. What firmware are you running?
View ArticleRe: DHCP bootp helper not forwarding on EX2200
Thanks for the reply. We're running version 12.3R9.4.> show version fpc0: -------------------------------------------------------------------------- Hostname: ASW01 Model: ex2200-48p-4g JUNOS Base...
View ArticleRe: DHCP bootp helper not forwarding on EX2200
I'm not sure if it's pertinent, but I noticed that the switch isn't getting ARP data for this vlan. > show arp interface vlan.323 {master:0} > show interfaces vlan.323 Logical interface vlan.323...
View ArticleRe: DHCP bootp helper not forwarding on EX2200
On an ex2200 running both 12.3R9 and 12.3R12 I see packets with your config. You might want to try posting the whole config as well as output of show interfaces terse, show vlans, and show route....
View ArticleRe: DHCP bootp helper not forwarding on EX2200
Thanks. Here's the full config, albeit slightly sanitised. This is the version based on vlan418, rather than the initial config we posted. # show ## Last changed: 2017-02-15 11:27:29 EST version...
View Article