Re: DHCP bootp helper not forwarding on EX2200
It's your loopback filter--try adding this. I don't have a dhcp server to test with but I think return traffic is directed to the dhcp client so you shouldn't need a filter for the return. If you do it...
View ArticleRe: DHCP bootp helper not forwarding on EX2200
Many thanks - that's done the trick. The DHCP server is now issuing a lease, but it's not returning back to the PXE server. Would the return path also require adjustments to the firewall, although it...
View ArticleRe: DHCP bootp helper not forwarding on EX2200
It may indeed. Perhaps allowing dhcp traffic from the dhcp server (from udp 68).
View ArticleEVPN broken after junos update
Hello, Thanks for reading my question. I have an EVPN setup with 2x MX960 and 2x EX9200. We are having some problems with this setup (see other topic) so we decided to update our MX firmware from...
View ArticleRe: EVPN broken after junos update
Hi ! Before 14.2R7.5 there were a lot of bugs and problems in the EVPN code and also some visible and invisible behaviour changes from version to version.According to personal experience and...
View ArticleRe: EVPN broken after junos update
Hi Alexander, Thank you for the information. As you state it might as well be a version incompatibility issue between the devices. It might also be a configuration change that i don't know about. But...
View ArticleRe: EVPN broken after junos update
as far as I know the chained composite command is in a hidden group and thus set automatically. for EVPN over MPLS there are no major command changes and additionsthe only nice thing is the posibility...
View ArticleBetreff: factory reset button ex3400
Hi, as far as i know there is no way to completely disable this button on the EX via cli. For the SRX there is a...
View ArticleRe: Finding incomplete ARP entries
@ PululkaHi NO, going to shell does not help in this casethe CLI "show arp " and the shell command "arp -a" both show exactly the same information in the same format and both are NOT displaying...
View ArticleRe: EVPN broken after junos update
Thanks again for the input. EX9200 comes with some limitations yes. It can only be used as a MPLS edge switch (MES) For example: LSP's are not supported. I do not use any multi-homing. Its 4...
View ArticleRe: EVPN broken after junos update
I left a ping running al day. It seems to allow traffic sometimes spontaniously. Look at the sequence nr numbers. -bash-4.1$ ping6 evs-web-01-352PING evs-web-01-352(evs-web-01-352) 56 data bytes64...
View ArticleBetreff: factory reset button ex3400
I saw that for srx and was honestly kind of surprised that this platform doesn't have it.
View ArticleRe: Finding incomplete ARP entries
Does arp -v help? I asume you are looking for host entries whose MAC is 00-00-00-00-00-00, unknown for associated IP, yes?
View ArticleBetreff: factory reset button ex3400
I looked at an EX3400, and yes this command is not present. I will try to check into the why behind this.
View ArticleRe: Stacking EX2300 Switches with 10 gb DAC
I called into JTAC about this because the switches were behaving oddly after I set this up. The show virtual-chassis command indicated they were working fine, but other commands would cause the...
View ArticleRe: Finding incomplete ARP entries
arp -v gives version info:% arp -v$Id: arp.c 652546 2014-06-04 09:33:16Z abollineni $
View ArticleClik here to view.
RVI in Private VLAN on EX3400
Hi The feature explore says that i can configure RVI for PVLAN(picture below).But the oficial...
View Articleno-local-switching missing on EX3400
Do you maybe know, why there is no no-local-switching command on my EX3400? root@ex3400-testowy1# show vlans klient1 { vlan-id 101; private-vlan community; } klient2 { vlan-id 102; private-vlan...
View ArticleEX4200 log on OS 15.1R5.5
Hi all, My EX4200 have log like below, please anyone help me to clarify what this log is about Feb 17 16:23:54 EX4200VC /kernel: rts_commit_proposalmput op: 2, peer_type:23, peer_index:0, vskid:0,...
View Article