EX4200-01 Etherchannel Issue
Hi, We are facing problem since the replacement of EX3200 + JUNOS upgrade activity of EX4200 from 12.3 to 15.1R5.5, such that, etherchannel is not working in case primary link goes down. Under normal...
View ArticleRe: qfx3500: Ethernet Switching not working
Hello, After putting the same transceivers on qfx as well as on corresponding peer device port & keeping whatever configuration you have on the interface, can you share output of following...
View ArticleRe: qfx3500: Ethernet Switching not working
Hello Rushi, thanks for your reply. root@switch-ipb2# show vlans default { vlan-id 1; l3-interface irb.0;} root@switch-ipb2# show interfaces xe-0/0/10 unit 0 { family ethernet-switching {...
View ArticleRe: qfx3500: Ethernet Switching not working
Hello, If device recognizes these interfaces as gig interfaces, you will have to configure them as gig interfaces.xe stands for 10gig interface & only if you have 10gig interfaces, your...
View ArticleRe: qfx3500: Ethernet Switching not working
Hello Rushi, I really tried to find how I could do it, but I didn't find. Could you please give me a hint how I could configured the xe-Interface to work as ge? Thank you. Best regards.
View Articleqfx3500 Switch Configure xe-Interface to work as ge
Hello, I have a Switch were I have inserted Modules for 1G-Speed. In Operational-Mode they appear as ge-Interfaces, but in Configuration-Mode they are listed as xe-Interfaces. How could I change them...
View ArticleRe: qfx3500: Ethernet Switching not working
Hi ,The reverse is possible(you can make a higher bandwidth capable interface to funtion with lower bandwidth ) but not the other way(40 gig can work as channelised 10 gig ports but not the other way...
View ArticleRe: qfx3500: Ethernet Switching not working
Hi Vincy, yes, that's exactly what I am trying to do. To make the xe (10G) work as a ge (1G) Interface. How could I achive that? Best regards,box
View ArticleRe: qfx3500 Switch Configure xe-Interface to work as ge
Its possible: Step 1: go to config mode type "top edit interfaces" Step 2: system will display something like this [top edit interface] Now type "replace pattern xe with ge" Ste 3:Commit Please mark...
View ArticleRe: qfx3500: Ethernet Switching not working
please follow the below blog post No 2 : http://forums.juniper.net/t5/Ethernet-Switching/qfx3500-Switch-Configure-xe-Interface-to-work-as-ge/m-p/305066#M15895
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Just FYI, but without SW support it is illegal (SW Piracy) for you (or anyone in same situation) to download any new EX SW than what ever version came with your switch originally, unless you purchase...
View ArticleEx4600 storm control dont work
Hello, PLEASE HELP !!!I tried to protect my EX4600 from storm-control, i tried to do it with BW limit and action shut down, but the switch didnt drop any packet or shut down the port with error...
View ArticleRe: Ex4600 storm control dont work
Could you try with either 14.1x53-D40 or D42 on both EX4600 and QFX5100? If works on QFX5100, it should work on EX4600 as [basically] the same product. The code version you have listed for QFX5100...
View ArticleRe: EX4200-01 Etherchannel Issue
Etherchannel (in Juniper terminology AE or LAG) does NOT work active-backup, but always work active-active basically. You could do some things with LACP settings, but far too deep a discussion for...
View ArticleRe: Ex4600 storm control dont work
Hi,Thank you for your replay.For the qfx5100 i cant now its my production,On the qfx5100 the storm control with action shut down it's work the port get sctl status, but without action shut down only...
View ArticleRe: Ex4600 storm control dont work
Sorry, what config? Maybe include both EX4600 and QFX configs.
View ArticleVirtual Chassis EX4600 Verification
We purchased 2 EX4600's and I created 4 VC ports, connected 4 40gig QSFP cables and preprovisions the virtual chassis. The virtual chassis is up and running. I have successfully done this on many...
View ArticleRe: Virtual Chassis EX4600 Verification
I would suggest to check that all 4 ports shows up as vc-ports when executing the 'show virtual-chassis vc-port' command.'show virtual-chassis active-topology' should also show how traffic between...
View Article