Re: DHCP release / renew on EX
Chris, You probably already tried to add more to the command i.e. the port. http://www.jnpr.net/techpubs/en_US/junos12.1x47/topics/reference/command-summary/request-system-services-dhcp.html
View ArticleRe: Ex4600 storm control dont work
This is what i configured on both switchs on qfx5100 only action shut down works, on ex4600 nothing workset forwarding-options storm-control-profiles Protect-BUM all bandwidth-level 100set interfaces...
View ArticleRe: Ex4600 storm control dont work
Why is your bandwidth-level set to 100? You only want action when bandwdith is determined to be 100% full? I suspect maybe EX4600 can't even figure this out. Can you set bandwidth to something more...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
EX3300 among other EX switches has limited lifetime software update entitlement
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Anyone in this situation, please read this article: https://kb.juniper.net/InfoCenter/index?page=content&id=KB15517&actp=search The SW warranty clearly states 90 days, with TAC providing HW RMA...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
I'll reiterate, enhanced limited lifetime warranty provides lifetime software update entitlement. It is only applicable to the designated switch models covered. It is true that it only provides 90 days...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Link got truncatedhttps://www.juniper.net/support/warranty/990240.pdf
View ArticleRe: EX4200-01 Etherchannel Issue
How is this response helpful? Everything you mentioned, including LACP primary/backup, is correctly configured in the config the OP attached. chassis { aggregated-devices { ethernet { device-count 2; }...
View ArticleRe: EX4200-01 Etherchannel Issue
Sorry my bad, i was looking at the wrong interfaces. Now my best guess is that in 14.1X53-D10 new link protection config option was added in for newer EX models, namely EX2300, EX3400, EX4300 (and...
View ArticleRe: EX4200-01 Etherchannel Issue
My guess about active/standby is this: ge-0/1/0 { description "AUGERE IC VIA Satcom"; ge-0/1/1 { description "Interconnect with AUGERE - Through MF"; One is via satellite, the other through a wireless...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
I'm back on v12 coz dot1x is seriously bugged on v15 but cmon.. is this serious?do you really mean that without a software license I am not allowed to upgrade the firmware to the latest recommended...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
Limited Lifetime Software Update Entitlement: In addition, throughout the period that it warrants the Covered Hardware Juniper Networks shall make available to Customer for use solely on the Covered...
View ArticleCan ex3300 and ex4200 rebuild /var during a scheduled reboot after firmware...
I'm pretty new to Juniper, so maybe the status at my new employer is rare, but it seems a large portion of our switches have errors in their /var partitions, as reported by fsck. Once I noticed the...
View Articleqfx3500 not support Extended-vni-list ? VXLAN + EVPN
Hello, I have qfx3500 with 14.1X53-D40.8 and i try set up vxlans with evpn in order to use qfx3500 as leaf. Problem is with lack of Extended-vni-list options. There is some way to workaround this ?...
View ArticleRe: Ex4600 storm control dont work
Bandwidth-level 100 is 100k traffic and not 100% bandwidth-level Link bandwidth (100..40000000 kbps) bandwidth-percentage Percentage of link bandwidth (1..100) Did you try this on D40 or D42 ?...
View ArticleRe: SFP validate failed? Trying to use a 10gig LR SFP+ in aggregated link
I'm not sure but this message seems to suggest the port you are using is somehow allocated to the VCP channel of a virtual chassis. cm_vchassis_extended_vcport_validate_remove Maybe this would...
View ArticleWhat happen if i put no-split detection at more than two VC member?
Hi All, Currently i'm use preprovisioned setup on EX3300 with ver 14.x. As per url https://kb.juniper.net/InfoCenter/index?page=content&id=KB13879&smlogin=true it said need to put no...
View ArticleRe: 802.1x broken in Junos 15.1R5.5
You're fine on your EX3300s but make note that this entitlement is only applicable to a few switch models mentioned in that support PDF. I'm sure it's a measure to compete with manufacturers who offer...
View Article