Re: Cannot add static ip on Ex 3300 which is configured with DHCP
What I ment was " DHCP works" but when a machine is assigned with static IP its doesnt work, it wont connect to internet . As a work around I deactivated the DHCP spoofing and then found it working
View ArticleRe: dot1x to long reconnect
Not sure your situation but if takes approximately 5 mins it sounds like FDB MAC age-out maybe what triggers the re-auth to function. Might suggest you change that timer (should be non-service...
View ArticleRe: dot1x to long reconnect
Sorry, about triggers (timer) you tell? Are you can tell more detail, please?
View ArticleRe: dot1x to long reconnect
I believe default MAC/FDB aging timer for Junos/EX is 300 seconds or 5 minutes. What is this, see here: http://www.juniper.net/documentation/en_US/junos15.1/topics/concept/bridging-mac-aging.html
View ArticleRe: dot1x to long reconnect
hmm ... If i true undestand parametr mac-table-aging-time specify aging time, i.e. time afet wich than mac address will be delete from ethernet-switching table (mac-address table).When dot1x (mac)...
View ArticleClik here to view.
Converting native-vlan-id from EX4200 to ELS-EX4600 not working.
Original EX4200 code; set interfaces ge-0/0/5 description "DEVVM03 NIC0" set interfaces ge-0/0/5 mtu 1514 set interfaces ge-0/0/5 ether-options auto-negotiation set interfaces ge-0/0/5 ether-options...
View ArticleRe: Cannot add static ip on Ex 3300 which is configured with DHCP
binoybaby, I want to know what happens if you do not set the secure static IP and mac address on the port. Wonder if the Meraki will work, even though it is not requesting a DHCP, the DHCP snoop would...
View ArticleRe: Ex4600 VC - routing problem and interface not available.
still not able to ping the 10.10.9.254 vlan 10 interface from console.
View ArticleRe: Trouble with SSH
Another solution, without a reboot, similar to the above: Run from shell as root "/usr/sbin/sshd": and review the errors: "Could not load host key: /etc/ssh/ssh_host_rsa_key...
View ArticleQFX 5100 Unstable even after latest version
Hi Mates, Need you help here to get suggestion . I have upgraded QFX 5100 after get suggestion from JTAC to Junos 14.1X53-D35.3After upgarde , we hit the VCF reload itself and this message is...
View ArticleRe: Ex4600 VC - routing problem and interface not available.
Found the problem, the 4300's had wrong software version.Arrrggg,
View ArticleL3 interface (RVI) operstatus, and minimum number of active switchports
Hi In ae interface configuration there is option "minimum-links". The entire ae bundle is brought down if there are less active links than this option specifies. Is there anything similar in RVI...
View ArticleRe: L3 interface (RVI) operstatus, and minimum number of active switchports
This is not a current feature. the RVI will only go down if there are zero interfaces up in the associated vlan.
View ArticleFalse «FPC 1 CPU Temp Sensor Too Warm» alarm from EX2200
I've got a pair of EX2200-48Ts that were recently upgraded to JUNOS 12.3R12.4 and combined into a Virtual Chassis. After just a few days uptime, the VC starts reporting a «FPC 1 CPU Temp Sensor Too...
View ArticleRe: Massive rolling VOIP issue please help (ex3300 stacks)
Ron will give this a try, thanks for the tip. will get this set up soon, just run a ping to laptop ? that shoudl cover it right?
View ArticleEVPN-VxLAN
Dear members, I am trying to configure a evpn-vxlan transport between 2 MX but I cannot establish vtep. Does anyone has already tried that or give me some suggest? ThanksAntonio
View ArticleNTP one hour delay
Hi, First, this is new deployment .Second, we have configured on all EXs and QFXs to sync timing with our DC server .However, we get 1 hour delay .Here is the configuration: admin@SW-VC-EX3300> show...
View ArticleMultiple interface units on trunk between EX4600 and MX960-VC
I'm prepping an EX4600 for use as a distribution switch. This will uplink to our core router, which is an MX960 VC. EX4600 is running 14.1X53-D30, and the MX960 is on 12.3R8.7. We have a mix of L2...
View ArticleMSTP single region root/regional root not aligned
http://www.juniper.net/techpubs/en_US/junos12.3/topics/concept/mx-series-multiple-stp.html"The CIST regional root is also the CIST root if there is only one region in the network." I have a single...
View Article