Quantcast
Channel: All Ethernet Switching posts
Browsing all 10307 articles
Browse latest View live

Re: NTP one hour delay

I don't think this would be related .. Any way its the same as the DC set system time-zone Asia/Jerusalem

View Article


Re: NTP one hour delay

Thanks Issue got fixed  We changed to Istanbul time zone and that fixed the issue ! Wired ! and something wrong with Jerusalim time zone

View Article


EX4550 lots of mac learning and delete within 2 sec

Hi, Im having some, to me, strange behavior with a EX4550-32F series Virtualchassis. We have it running on the 12.3R6.6 Junos and in a VC setup (2 switches). On this, we have give or take 27 LACP...

View Article

Re: MSTP single region root/regional root not aligned

I noticed the Nexus said PVST against the port.So it was setting the boundary flag in the BPDU. I converted the EX switch from default STP to RSTP.Fix on the Cisco was to do: Reinitializing the...

View Article

Re: QoS traffic classification not working on EX3300

I have a similar scenario.I have an EX2200 (VC 2 members) 12.3R9.It is L2 only.  Vlan 119 is my 'voice' vlan.  The RVI terminating it is upstream on a trunk on this EX2200 to another EX2200.Phone on...

View Article


Re: EVPN-VxLAN

Hi all I am using JunOS 14.2R5.8 and not using a NSX controller. From juniper pathfinder the release supports the EVPN with VXLAN for Layer 2 data center interconnect...

View Article

Re: QFX 5100 Unstable even after latest version

I am experiencing the same behavior on our QFX5100s.  They are in a VC but not a VCF. Opening a case with JTAC now. I just discovered the issue in the logs.

View Article

EX bug

Hi Is anyone familiar with this king of problem ?When there unexpected power problem in the site and the EX swich do reboot , we can't log into it again .When modifying configuration on vlans on the...

View Article


Re: EX bug

I would like add something else : when deleting vlan from trunk on the j-web , all the other vlans got deleted too !!

View Article


Re: EX bug

Which specific EX product and what code release are you running?  Is this standalone or VC?

View Article

Re: QoS traffic classification not working on EX3300

Whoops.. Firewall is top down.. Terms were incorrectly positioned...\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\term...

View Article

Re: QoS traffic classification not working on EX3300

A final note... I don't understand why.. http://www.juniper.net/techpubs/en_US/junos12.3/topics/example/cos-ex-series-configuring.html, the firewall filter is matching 'source' port instead of...

View Article

Re: EX bug

VC-EX4200(BackBone) = 12.3R4EX2200 (a lot of them) = 12.3R6 We noticed something else , when deleting one vlan via jweb on one trunk port on the VC EX4200 BB , all the rest of the vlans deleted too !...

View Article


Re: EX bug

Also when deleting the default vlan from specific EX2200 switch , we lost access to the switch

View Article

Re: EX bug

I have no idea what is going on at your site, as this equipment does work fine at MANY other places.  I suggest you do need to work with TAC on this one, BUT I would first suggest you upgrade code on...

View Article


Re: EX bug

Check if this related to your issue !https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR980706

View Article

EX3300 Virtual-Chassis: ARP entries listed as permanent in client-vlan

Hi There! A customer is having problems with a VC of four EX3300. It seems that the ARP table for the client vlan is corrupt because all the clients in this vlan are flaged 'permanent' instead of...

View Article


Re: EX bug

Hi rccpgm / Abed AL-R, Thanks . I will try to upgrade and see if this issue got fixed .

View Article

802.1x auth failed but client gets access to voice VLAN

Hello, we have deployed multiple switches with access ports configured for voice vlan and 802.1x auth. As failover guest vlan is configured. No we have encountered that even if the voip client fails...

View Article

Image may be NSFW.
Clik here to view.

DHCP Relay

Hello Community, Im trying to successfully setup a DHCP relay on an SSG140. Im confident that I have things setup correctly on the firewall, however I suspect that my EX2200 switches inbetween the...

View Article
Browsing all 10307 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>