Re: Radius & routing-instance
This switch has 4 different routing instances configured and I can't ping anything if I don't specify which routing-instance I should useset interfaces vlan unit 117 family inet address...
View ArticleRe: Radius
Did some research on this and found that EX currently do not support radius reachability via routing-instance.It supports only through the default-routing-instance. A workaround here would to be do...
View ArticleRe: Radius
Ah okey do you have any suggestions on how to make a default-routing-instance configuration or route leak?
View ArticleRe: Radius
For instance: PC/Radius server (10.10.10.5) (Vlan 10)-------Layer 2 switch=====Trunk(ae0)====EX4600(layer 3)IRB.10: 10.10.10.1IRB.20: 20.20.20.1IRB.30: 30.30.30.1- Create three IRB that is IRB.10,...
View ArticleRe: Radius
@karand's solution and information is correct, but if ALL you want to be able to do is reach the radius server, configured in default VR (inet.0), and keep all other traffic separated between the VRs...
View ArticleClik here to view.
Re: Radius
@karand & @rccpgm Thank you so much for the assistance and help. I will try and build an appropriate configuration and try the solution and get back to you how everything went. But for now, many...
View ArticleWhat version?
Can anyone identify what version of JUNOS this is? I've never seen this before. root@xxx> show version fpc0: -------------------------------------------------------------------------- Hostname: xxx...
View ArticleRe: What version?
This seems to be a daily image based on 14.1Could you confirm where did you download it from ?
View ArticleRe: What version?
Thanks, I've just found out it was a unit used as part of a debug session with JTAC & engineering to troubleshoot a PFE cache issue.
View ArticleRe: QFX3500-48s4q-acrb stuck in virtual chassis/linecard config
I went ahead and deleted all configurations except for the password then did the config how you suggested, commited and then rebooted.However when the unit came back up after the reboot the config had...
View ArticleRe: EX3300 LLDP-MED and ShoreTel 400 series phone - works intermittently
My only suggestion to you would be see if you could try to change the code from 15.1 to 12.3 (R12-S6 or higher) and then report what happes. Good luck.
View ArticleExample of as-path-prepend
Hello.Can someone please give me a working example of how I tell my peer's peers to use as path to me?Example: I have ASN1111 and my peer (upsteam provider) has ASN2222 and I want to receive any...
View ArticleRe: [QFX5100] dhcp-relay options
What are the changes you made on the downstream devices trunk to make this work ?
View ArticleClik here to view.
SOLVED - DHCP relay on QFX3500 not working
Hello, I have a QFX3500 that is the router for all my l3 vlans (irbs on this device) and I'm trying to setup dhcp-relay to work with our PXE server. I have this exact config on a QFX5100 working...
View ArticleRe: DHCP relay on QFX3500 not working
and like always, one simple command was misssed and I overcomplicated the issue. set forwarding-options dhcp-relay active-server-group dhcpserver
View ArticleRe: Example of as-path-prepend
Please refer to below doc. https://www.juniper.net/documentation/en_US/junos/topics/example/routing-policy-security-routing-policy-to-prepend-to-as-path-configuring.html As-path prepend is useful to...
View ArticleRe: Example of as-path-prepend
Hi, You may follow the below link. https://www.juniper.net/documentation/en_US/junos/topics/example/routing-policy-security-routing-policy-to-prepend-to-as-path-configuring.html in your case, whichever...
View Articleex and cisco stp interoperability
Hello to All, Topic: stp interoperability between cisco and ex swithc.ref: https://www.juniper.net/us/en/local/pdf/implementation-guides/8010002-en.pdfI already read different forum and juniper...
View ArticleFirewall Ethernet-switching Input Not working
Hello all, I am new to the firewall settings in junos and made the following setup with the outcome the only the ICMP rule works but I have no connectivity on the other rules into the vlan. The idea...
View Article