Re: Trunk VLANS on EX4300 Uplink Port Configuration
Thanks for your repsonse. I guess my requirement would be to be able to ping the switch from my router and then trunk all vlans. I've made the two changes that you had pointed out to me and I'm still...
View ArticleRe: Trunk VLANS on EX4300 Uplink Port Configuration
I was able to figure this out. I do indeed need to configure an uplink VLAN (or use the default vlan) and assign it to the uplink port like so: set interfaces ge-0/0/23 native-vlan-id 1000 set...
View ArticleRe: Replace HP QinQ with Juniper EX4300 Q-in-Q
I was able to get it working by adding set interfaces ae0 ether-options ethernet-switch-profile tag-protocol-id 0x88a8 On my customer interfaces I did the following and seems to work fine.set...
View ArticleMX104 maximum MAC address space and switching forwarding rate in MPPS
Hi All, Anyone please suggest me MX104 Layer-3 Switching how many maximum MAC address space supported and how much Switch has forwarding rate supported in million packets (64 Bytes) per second (MPPS)...
View ArticleRe: QinQ and Trunk
I have exactly the same question.I did find out that it's possible to add another unit to the uplink port, with a single vlan, in your example that would be:set interfaces ae2 unit 1 vlan-id 900 That...
View ArticleDRAM use in Access Switch ?
Hi,I'm evaluating an access switch, there's one vendor have 1 GB and 2 GB dram, I wonder what dram function/use in Access Switch, from what I know It makes a difference in routing world(fib) but in...
View ArticleRe: QinQ and Trunk
How about configuring the port as trunk? Would something like this work - labroot@bangui# show interfaces ge-0/0/2 unit 0 {...
View ArticleRe: QinQ and Trunk
On EX3400 (with Enhanced Layer 2 Software, ELS) that would only work if you are not using QinQ vlans.As soon as you want to add a QinQ vlan suddenly everything is different in ELS. I'm wondering if...
View ArticleCisco CDP phones working on EX ELS switches
Hello.Just posting how we got around the legacy 7960/7940 CDP required issues . First we did a tcpdump capture from one of the cisco switches that sends info to the legacy phone.. Using a linux...
View ArticleRe: Cisco IP Phones on Juniper EX4200's
See my posthttps://forums.juniper.net/t5/Ethernet-Switching/Cisco-CDP-phones-working-on-EX-ELS-switches/m-p/321989#M18067You have to do a little work yourself .. but not a lot ..
View ArticleEX4300 / PulseSecure Gateway Internal Port Native VLAN
Hi all, we currently facing following scenario.We try to implement two PulseSecure Gateways in a High-Availibilty-Setup. (Maybe some of you already have some experiences with the devices. Pulse was...
View ArticleRe: EX4300 / PulseSecure Gateway Internal Port Native VLAN
It sounds like you don't need vlan 25 on the PSA at all. The PSA DNS request will originate from the internal port ip address and this VLAN needs a gateway address that can then reach the rest of the...
View ArticleRe: EX4300 / PulseSecure Gateway Internal Port Native VLAN
Hi, the gateway for the internal port (which is needed to form a valid cluster) should also be memeber of VLAN25.I cannot configure VLAN-Parameters on the internal port. I only can configure...
View ArticleEX2200 and Direct Attach cable - does it work?
I have a simple question regarding EX2200 switches and DA cables. I found an article describing the compatibility of DA cables. However, there is nothing about EX2200...
View ArticleRe: EX2200 and DIrect Attach cable - does it work?
Hello,This has been already answered back in 2012https://forums.juniper.net/t5/Ethernet-Switching/EX2200-virtual-chassis-with-DAC-cables/td-p/166786HTHThxAlex
View ArticleAssign IP for each me0 interface on switch in a VC
Hi all! Newbie here, I've been trying to setup an OOB network for our EX4300 switches in a VC. I would like to individually assign IP addresses to the me0.0 interface on each switch (master, backup,...
View ArticleRe: Copy files between EX VC members
This link will help you, https://kb.juniper.net/InfoCenter/index?page=content&id=KB15400
View ArticleEX4300 EX-BCM PIC EDC configuration not complete
Hi, We have a EX4300-48t virtual-chassis with 2 members, apparently working fine and with no alarms, but we are all the time getting in the log messages this:Apr 24 07:37:14 CPCL-UKBAS-01-0001 pfex:...
View Article