DHCP snooping doesn't update lease timer during a lease renewal
Hi,there is an issue I observe on a Juniper virtual-chassis made of a pair of EX 4550 switches running by Junos 12.3R11.2. The environment looks like this:Windows dhcp-client connected to the...
View ArticleHow to connect two switches
Hi folks,Is there away I can connect two juniper switches togather with two links between them. Two link I mean primary route and protection route. What kind of config will I put on the switchs to...
View ArticleRe: How to connect two switches
Just configure both switch interfaces as an AE/LAG. Search on-line you'll find plenty of docs.
View ArticleEx4300 Virtual Chassis member issue
Hi everyone! It's my first time configuring Juniper devices and I would like to ask some help if you may. Scenario: We have SRX240 HA Cluster connected 2 EX4300 in virtual chassis. I attached the...
View ArticleRe: How to connect two switches
Hi Rccpgm,Thanks a lot for the response, apart from LAG, is there any other option? Sheeel.
View ArticleRe: How to connect two switches
apart from LAG, is there any other option? Yes you could use RTG /(redundant trunk group) defined on one of the switches. ( google for that ) regards alexander
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi,Have you tried to enable the no-split-detection statement ?{master:0}[edit] root@switch# set virtual-chassis ?Possible completions:+ apply-groups Groups from which to inherit configuration data+...
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
Hi,I don't this is configuration related issue . I think its version related issue , I would suggest upgrading to the recommended version, and then if issue remain , raise a case to JTAC .I didn't see...
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
Hi,OK now I'm sure its verison related issue .refer to this link :https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR864078I would suggest upgrading .
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
But he uses junos version 12.3R11
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
Hi,Yes I noticed that . Thats why in the first place I recommended raising the issue to JTAC .Now according to PR864078 they say it fixed at the 12.3R3 and it fixed again at the 13.2R1 which means this...
View ArticleRe: DHCP snooping doesn't update lease timer during a lease renewal
Andrei,what is happening with dhcp-client during renewal process (successfully or not)? Are any log error messages?
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi Abed AL-R, Thank you for your reply. Yes, no-split-detection is already enabled. I have attached the full configuration. root@EX-4300# show virtual-chassisno-split-detection;member 0{...
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi eaguilar,Thank you . Please let us demonstrate the issue again . Reboot the master deivce to let a failover happen again in order switch over the backup device , and lookup into the var log messages...
View ArticleRe: EX2200-C POE+
Hi there, JUNOS Base OS boot [12.3R6.6]JUNOS Base OS Software Suite [12.3R6.6]JUNOS Kernel Software Suite [12.3R6.6]JUNOS Crypto Software Suite [12.3R6.6]JUNOS Online Documentation [12.3R6.6]JUNOS...
View ArticleRe: Ex4300 Virtual Chassis member issue
Hi, Sorry for answering late . I'll check the output you attached and then I'll update you .
View ArticleRe: Warning: configuration block ignored: unsupported platform (ex4200-48px)
That did the trick, thanks for the quick response Just curious why the code would even commit if this block is in there
View ArticleRe: EX2200-C POE+
root@as-4> show poe controller Controller Maximum Power Guard Management Status Lldpindex power consumption band Priority 0...
View Article