Re: IOS upgrade EX4200
please also remember to upgrade the jloader (bootloader) on the switch as JunOS version above 10.4R3 required this to boot.Refer to...
View ArticleRe: How to add or remove multiple VLANs from few interfaces without using...
Thanks! Replace pattern is a key to rename vlans and then add or remove them quickly.
View ArticleRe: which Junos for my EX4200
ok thanks you for your advice. So , can i update 12.3R6.6 to 12.3R12.4 ? or i have to update 12.3R9 first ??
View ArticleRe: IOS upgrade EX4200
thanks everyone. I will do that and update you guys on my progess.
View ArticleRe: 2:2 translation from c-vlan to s-vlan and vice versa - EX Swtich !!!
Hi, Could we acheive this requirement by using MX.EssentialRoot wrote:Return traffic - that's will be the problem for you. I guess you cannot map both inner- and outer-vlan-ids (1:N/1:N) to many on a...
View ArticleRe: [QFX5100] dhcp-relay options
hi EssentialRoot, everything is in default inet.0all irbs are reachable (windows dhcp server to qfx and vice versa)dhcp servers are working quite well. i dont have an issue when using static ip...
View ArticleClik here to view.
Re: 2:2 translation from c-vlan to s-vlan and vice versa - EX Swtich !!!
Maybe bridge-domain could helps you or even VPLS. interface ge-0/0/1 flexible-vlan-tagging encapsulation flexible-ethernet-services unit 1020 encapsulation vlan-bridge vlan-tags outer 10 inner 20 unit...
View ArticleClik here to view.
Re: 2:2 translation from c-vlan to s-vlan and vice versa - EX Swtich !!!
Or try to use explicit manipulation for vlan-tags with input-vlan-map and output-vlan-map:interface ge-0/0/1 flexible-vlan-tagging encapsulation flexible-ethernet-services unit 1020 encapsulation...
View ArticleClik here to view.
Re: [QFX5100] dhcp-relay options
Config looks good... almostIf you have no problems with statically configured clients, it's just saying about you have problems with DHCP-RELAY or with DHCP-SERVER 1. What do you see in the dhcp log of...
View ArticleRe: [QFX5100] dhcp-relay options
Please run the statistics command to confirm if the packets are been seen and forwarded. show helper statisticsConfigure trace options and post the results after an attempt to get a DHCP address. set...
View ArticleRe: 2:2 translation from c-vlan to s-vlan and vice versa - EX Swtich !!!
Hi, I believe the MX certainly supports swap-swap operation with input-vlan-maps and output-vlan-maps.Below is another variation of the possible config using inner-list:MX# show interfaces ge-0/0/4...
View ArticleClik here to view.
BGP L2VPN Question - Site-ID and Remote-Site-ID
Could anyone explains to me why there is only 1 VC up (which is VLAN 193)? and what is required to make both the VCs up and functional? instance-type l2vpn;interface ge-0/0/1.192;interface...
View ArticleClik here to view.
EX3300 - out-of-band interface - not working
Hello,I have problem with configuring out-of-band interface. First of all I`ve never worked with any of Juniper producst before. Also I enherited this infrastructure after previous employees so it was...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Could anyone explains to me why there is only 1 VC up (which is VLAN 193)? and what is required to make both the VCs up and functional?YES you need to correctly understand the mechanism of L2VPN: if...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Hi , Two options to make it work: Can you place site CE2's ge-0/0/0.192 interface in site-identifier 3 , things will work L2VPN is a point to point connection since ge-0/0/1.0 193 is the first ifl in...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Hi, As I understand, L2VPN is point to point [P2P].You can have 2 LVPNs for P2P for each vlan or a P2MP using VPLS. Alternatively, you can also configure an L2VPN for a vlan-bundled...
View ArticleRe: EX3300 - out-of-band interface - not working
Initial thought is that you have to change web-management to listen on me0.0 and remove the vlan.1 interface and change the IP to be bound to the me0.0 instead of vme0.0 (vme0.0 is used in virtual...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Thank you all for the replies. I know that L2VPN is a point-to-point connection, however, what I miss here is the endpoints of the P2P L2VPN. For example, will the site referenced under the [protocol...
View ArticleRe: BGP L2VPN Question - Site-ID and Remote-Site-ID
Can you try configuring remote-site id for each of site's interface and check something like below: HUB: set routing instance hub protocol l2vpn{ site 1 ifl I remote-site-id 2ifl 2 remote-site-id 2ifl...
View ArticleClik here to view.
Re: BGP L2VPN Question - Site-ID and Remote-Site-ID
I have tried this already, but it seems that you can't replicate remote-site-id or use it more than once. root@MX-104-5e1# commit [edit logical-systems pe1 routing-instances l2vpn protocols l2vpn site...
View Article