Re: Set a trunk port with access VLAN issue
OK thanks for your replay I know it sounds strange but the problem is not the server, it seem to be the operating systemWith windows operating system it works but with unix it is notThat's why I though...
View ArticleRe: ex3300 and Voip
Hi, Have you checked if its related to LLDP-MED ? set protocols lldp-med interface all...
View ArticleRe: ex3300 and Voip
root@swtest> show lldp detailLLDP : EnabledAdvertisement interval : 30 secondsTransmit delay : 2 secondsHold timer : 4 secondsNotification interval : 0...
View ArticleRe: Set a trunk port with access VLAN issue
Did you try setting MTU to like 9192 or something BIG? EX device does not know the difference between external server operating systems. It must be something different in the packet format.
View ArticleClik here to view.
EX-2200 Virtual Chassis - 3rd member not showing up
I am not able to see the 3rd member in the JWEB.When I ssh to the VC, I can see the ports I created.When I use the JWEB, I do not see the ge-2/0/0-47 ports. When I issue a halt, it only see's two...
View ArticleRe: Set a trunk port with access VLAN issue
Small ICMP packets are not susceptible by MTU. ICMP works or not?First, your config for trunk interface has some mistakes.Read carefully this KB:...
View ArticleRe: ex3300 and Voip
Hi, Please check as the PDF I provided you previously if your avaya ip phones support LLDP-MED . http://www.juniper.net/cn/zh/local/pdf/app-notes/3500131-en.pdf Page 4
View ArticleRe: Set a trunk port with access VLAN issue
If this is config issue, why does it work for one type (windows) machine, and not others?
View ArticleRe: ex3300 and Voip
New Avaya phones all support this, and should be the default phone setting.
View ArticleRe: ex3300 and Voip
Enable LLDP on interface ge-0/0/18.0 set protocol lldp interface ge-0/0/18.0
View ArticleRe: ex3300 and Voip
Dear EssentialRoot,You don't need to enable LLDP on port 18 if LLDP-MED is enabled on it as the output shows .As you can see "show lldp detail" shows both vlans . 100+510 .You can view the voice vlan...
View ArticleRe: EX2200-C POE+
You may also try to enable lldp-med for this interface:set protocol lldp-med interface ge-0/0/1
View ArticleRe: Set a trunk port with access VLAN issue
this applies for untagged traffic only. Who knows, maybe win nic driver has a different mechanism of behavior for untagged frames. But problem with tagged traffic must be within linux.
View ArticleRe: Set a trunk port with access VLAN issue
Thanks for your replies Yes I don't know exactly why it works under windows system but not with linux ones.The ICMP does not work too Anyway I will try removing the native VLAN form the tagged list in...
View ArticleRe: EX-2200 Virtual Chassis - 3rd member not showing up
It needs to be running the same version junos as the other two members.request system software add /path/to/image/jinstall-ex-2200-xxx member 2
View ArticleLAG/LACP facing a misconfigured switched... loop ?
Hi, We run a private datacenter with EX4500 VC at the core and EX4200 VC at the edges. On the EX4200 stacks, we've got hundreds of vmware/Dell servers with multiple 1G attachments.We don't use LACP on...
View ArticleRe: EX-2200 Virtual Chassis - 3rd member not showing up
Member 0 - 12.3.R6.6 Member 1 - 12.3R6.6 Member 2 - 12.3R11.2 Your correct, not sure how it got upgraded.
View ArticleRe: LAG/LACP facing a misconfigured switched... loop ?
Simple answer yes, no worries, with Active LACP. Without proper LACP communication, the link will not come up at all, so no loop can be formed, but no communication could happen, with a...
View ArticleRe: LAG/LACP facing a misconfigured switched... loop ?
Hello,To add - if You are greatly worried about Your customers doing all sort of silly things, then You can use LACP passive.With LACP passive, on EX switches, the LAG won't come up and won't process...
View Article